NHTSA lists 2 complaints for the 2013 BMW M6, 0 of them mention a crash and 0 mention a fire. 0 complaints mention an injury, with 0 injuries and 0 deaths reported.
Data build 2026-10-08.
NHTSA lists this vehicle as BMW M6.
Model-generated complaint tags
These labels are model-generated, not NHTSA data.
Failure modes| Label | Count | Share of tagged | Mean confidence |
|---|
| loss of control | 1 | 50.0% | 0.69 |
|---|
| mechanical failure | 1 | 50.0% | 0.85 |
|---|
Severities| Label | Count | Share of tagged | Mean confidence |
|---|
| moderate | 2 | 100.0% | 0.84 |
|---|
Model: typesafe/jev-1.13-20260917; schema version: tag-v1. 2 tagged complaints of 2 complaints (100.0%).
Confidence is the model's own probability for the label it chose (0 to 1), not accuracy.
Model-generated labels on tagged complaints only. Model years 2013 and newer are tagged in full; 2012 in part (see tagged_share); earlier model years have no tags. NHTSA's own flags remain separate in the complaints block.
Recalls
See new recalls and investigations this week.
2 recalls.
Date: 2017-08-08. Systems: AIR BAGS.
Defect: BMW of North America, LLC. (BMW) is recalling certain 2012-2013 BMW X3 xDrive28i, X3 xDrive35i, and M6 Convertible vehicles and 2013 M6 Coupe vehicles. The affected vehicles have a driver's frontal air bag inflator that may have been improperly welded.
Consequence: In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator housing could separate from the base plate and result in metal striking the vehicle occupants, potentially resulting in serious injury or death.
Remedy: BMW will notify owners, and dealers will replace the driver's front air bag module, free of charge. The recall began October 6, 2017. Owners may contact BMW customer service at 1-800-525-7417.
Do not drive: No. Park outside: No.
Date: 2012-09-28. Systems: ENGINE AND ENGINE COOLING.
Defect: BMW is recalling certain model year 2013 M5, M6 Coupe, and M6 Convertible vehicles, manufactured from July 19, 2012, through September 11, 2012. Due to a manufacturing process error, the tolerance between the engine oil pump's drive shaft and the pump's rotor was not within specification. As a result, the pump's driveshaft could separate from the rotor.
Consequence: Separation of the pump's driveshaft from the rotor could lead to a sudden loss of oil pressure causing the possibility of complete engine failure, resulting in an engine stall-like condition, increasing the risk of a vehicle crash.
Remedy: BMW will notify owners, and dealers will replace the oil pump, free of charge. The safety recall began on November 30, 2012. Owners may contact BMW at 1-800-525-7417.
Do not drive: Yes. Park outside: No.
Manufacturer communications
354 manufacturer communications.
Communications by system| System | Count |
|---|
| EQUIPMENT | 110 |
|---|
| ELECTRICAL SYSTEM | 107 |
|---|
| ENGINE | 40 |
|---|
| EQUIPMENT ADAPTIVE/MOBILITY | 29 |
|---|
| ENGINE AND ENGINE COOLING | 26 |
|---|
| FUEL SYSTEM, GASOLINE | 24 |
|---|
| POWER TRAIN | 20 |
|---|
| SERVICE BRAKES, HYDRAULIC | 16 |
|---|
10249027
Date: 2024-01-11. Type: Service Bulletin/Repair Instructions. Systems: ELECTRICAL SYSTEM.
The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle A A?A A A A discharged batteryA A?A A A A compl
10244237
Date: 2023-10-13. Type: Service Bulletin/Repair Instructions. Systems: SERVICE BRAKES, HYDRAULIC.
Functional noises (squealing/honking) when braking shortly before the vehicle comes to a stop. CAUSE Material-
10239605
Date: 2023-06-01. Type: Service Bulletin/Repair Instructions. Systems: WHEELS.
The Dynamic Stability Control (DSC) warning light comes on while driving. The following DSC fault codes for the wheel speed sensors are stored: 480712 and/or 480715 and/or 480718 and/or 48071B They cannot be cleared, even though the wheel speed sensors work correctly and no problem can be found
10238090
Date: 2023-05-01. Type: Service Bulletin/Repair Instructions. Systems: ELECTRICAL SYSTEM.
After programming the head unit (HU-H2), activating the FSC (German word Freischaltcode) Enabling Codes repeatedly fails.
10230716
Date: 2022-12-01. Type: Service Bulletin/Repair Instructions. Systems: EQUIPMENT.
With the court's FINAL approval, BMW of North America, LLC (BMW NA) has entered into a nationwide settlement with the plaintiffs in the following class action: Isley, et al. v. Bayerische Motoren Werke Aktiengesellschaft and BMW of North America, LLC.
10227568
Date: 2022-10-01. Type: Service Bulletin/Repair Instructions. Systems: AIR BAGS, BACK OVER PREVENTION, LANE DEPARTURE, SEATS, UNKNOWN OR OTHER.
According to the customer, the airbag warning light was on, but it may not be illuminated when the vehicle arrives in the workshop. 1. ACSM fault code "930A60 - Seat occupancy detection, front passenger; malfunction" is stored. The fault may or may not currently be present. Or 2. ACSM fault code "93
10214990
Date: 2022-05-01. Type: Service Bulletin/Repair Instructions. Systems: ELECTRICAL SYSTEM.
The Headunit High (HU-H), also called NBT, began replacing the Car Information Computer (CIC) on certain MY2013 vehicles with option 609 (as of 7/2012 production). This uses map North America NEXT. The Headunit High 2 (HU-H2), also called NBT-EVO, superseded the NBT HU and was introduced in 3/2014.
10211851
Date: 2022-03-01. Type: Service Bulletin/Repair Instructions. Systems: ENGINE, ENGINE AND ENGINE COOLING.
This bulletin outlines the procedure for checking the engine timing chains for wear, and should be completed in conjunction with SI B11 06 14, "N63 Customer Care Package." The N63CCP and N63 Engine Check the Timing Chain are NOT mandatory Technical Campaigns or Recalls. They should be completed only
10203336
Date: 2021-09-01. Type: Service Bulletin/Repair Instructions. Systems: SERVICE BRAKES, HYDRAULIC.
Inform the customer during a consultation that the M Compound (standard equipment) and M Carbon Ceramic (optional) brakes are high-performance brake systems which are designed for sporty, dynamic driving styles. As a side effect of the highest possible brake performance, customers are likely to hear
10201141
Date: 2021-07-01. Type: Service Bulletin/Repair Instructions. Systems: SERVICE BRAKES, HYDRAULIC.
Inform the customer during a consultation that the M Compound (standard equipment) and M Carbon Ceramic (optional) brakes are high-performance brake systems which are designed for sporty, dynamic driving styles. As a side effect of the highest possible brake performance, customers are likely to hea