10083042
Date: 2016-09-28. Type: Service Bulletin/Repair Instructions. Systems: EQUIPMENT.
A TECHNICAL INSTRUCTION FOR INSTALLING INSULATION BETWEEN THE TOP EDGE OF THE BACK PANEL AND EVAPORATOR HOUSING.
No complaints are listed for the 2014 Carrier Transicold X4 7300. NHTSA's API and bulk file list none in this build.
Data build 2026-10-09.
NHTSA lists this vehicle as CARRIER TRANSICOLD X4 7300.
Complaints per 100k sold unavailable. No sales source is available for this record.
Model-generated complaint tags: No complaints are listed for tagging.
See new recalls and investigations this week.
0 recalls.
0 investigations; 0 open.
9 manufacturer communications.
| System | Count |
|---|---|
| EQUIPMENT | 5 |
| ELECTRICAL SYSTEM | 2 |
| ENGINE | 2 |
| BACK OVER PREVENTION | 1 |
| ENGINE AND ENGINE COOLING | 1 |
| STRUCTURE | 1 |
Date: 2016-09-28. Type: Service Bulletin/Repair Instructions. Systems: EQUIPMENT.
A TECHNICAL INSTRUCTION FOR INSTALLING INSULATION BETWEEN THE TOP EDGE OF THE BACK PANEL AND EVAPORATOR HOUSING.
Date: 2015-08-14. Type: Service Bulletin/Repair Instructions. Systems: EQUIPMENT, STRUCTURE.
05G valve plate replacements on X2 / X4 models
Date: 2015-06-25. Type: Service Bulletin/Repair Instructions. Systems: BACK OVER PREVENTION.
Software.
Date: 2015-05-18. Type: Service Bulletin/Repair Instructions. Systems: ENGINE.
Carrier Transicold has determined that certain X4 7300/7500 and Vector 8500/8600 units must be reworked. In the units identified in the bulletin, the engine lift pump oil supply line was not properly torqued, potentially causing an oil leak. With this updated bulletin revision, the affected unit s
Date: 2015-02-13. Type: Service Bulletin/Repair Instructions. Systems: ELECTRICAL SYSTEM, EQUIPMENT.
CARRIER TRANSICOLD: VECTOR, X2 AND X4 EQUIPPED WITH APX CONTROL SYSTEMS NEEDS UPDATED SOFTWARE, DECALS, AND OPERATOR MANUALS. *TA
Date: 2015-02-03. Type: Service Bulletin/Repair Instructions. Systems: ENGINE AND ENGINE COOLING.
CARRIER TRANSICOLD: SOME X4 7300/7500 & VECTOR 8500/8600MT UNITS NEEDS ENGINE LIFT PUMP OIL SUPPLY LINE WAS NOT TORQUED/INSTALLED PROPERLY. *TA.
Date: 2015-02-03. Type: Service Bulletin/Repair Instructions. Systems: ENGINE.
Carrier Transicold has determined that certain X4 7300/7500 and Vector 8500/8600 units must be reworked. In the units identified in the bulletin, the engine lift pump oil supply line was not properly torqued, potentially causing an oil leak.
Date: 2015-02-02. Type: Service Bulletin/Repair Instructions. Systems: EQUIPMENT.
Technical instructions for reworking units identified in SER15-003.
Date: 2014-12-15. Type: Service Bulletin/Repair Instructions. Systems: ELECTRICAL SYSTEM, EQUIPMENT.
CARRIER TRANSICOLD: DEALER LETTER EXPLAINS THAT CARRIER TRANSICOLD WILL BE INSTALLING A NEW SOFTWARE FEATURE CALLED "INSPECT MODE" TO PREVENT ANY UNIT FROM STARTING ONCE THE MODE IS ACTIVATED. *TA.
None listed.
| NHTSA model label | Complaints |
|---|---|
| X4 7300 | 0 |
The free rate-limited demo needs no key.
curl "https://api.theusedcarindex.com/v1/demo/vehicle_risk?make=Carrier+Transicold&model=X4+7300&year=2014"Paid endpoint: https://api.theusedcarindex.com/v1/vehicle_risk. MCP endpoint: https://api.theusedcarindex.com/mcp.