No complaints are listed for the 2017 Hyundai Equus. NHTSA's API and bulk file list none in this build.
Data build 2026-10-09.
NHTSA lists this vehicle as HYUNDAI EQUUS.
Model-generated complaint tags: No complaints are listed for tagging.
Manufacturer communications
27 manufacturer communications.
Communications by system| System | Count |
|---|
| EQUIPMENT | 7 |
|---|
| EQUIPMENT ADAPTIVE/MOBILITY | 5 |
|---|
| ENGINE AND ENGINE COOLING | 4 |
|---|
| POWER TRAIN | 4 |
|---|
| ELECTRICAL SYSTEM | 3 |
|---|
| TIRES | 3 |
|---|
| AIR BAGS | 2 |
|---|
| EXTERIOR LIGHTING | 2 |
|---|
11032522
Date: 2026-04-10. Type: Other. Systems: AIR BAGS.
The National Highway Traffic Safety Administration (NHTSA) has issued an urgent safety advisory regarding dangerous, counterfeit drivera side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN), that have been identified in U.S. vehicles following prio
11032523
Date: 2026-04-10. Type: Other. Systems: AIR BAGS.
The National Highway Traffic Safety Administration (NHTSA) has identified the presence of substandard and dangerous drivera s-side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN). These inflators were not supplied, approved, or authorized by the ve
11025476
Date: 2025-11-06. Type: Service Bulletin/Repair Instructions. Systems: EXTERIOR LIGHTING.
This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary
10251285
Date: 2024-02-14. Type: Service Bulletin/Repair Instructions. Systems: VISIBILITY, VISIBILITY/WIPER.
This bulletin contains information about the proper removal of the windshield wiper blade protective cover on all models. If the protective cover is not removed correctly, there is a possibility of the rubber insert and rail spring becoming partially separated on the inner side of the wiper blade, w
10247189
Date: 2023-10-13. Type: Service Bulletin/Repair Instructions. Systems: ENGINE AND ENGINE COOLING.
This bulletin provides important checkpoint guidelines when performing engine oil and filter change services.
10235566
Date: 2023-04-24. Type: Service Bulletin/Repair Instructions. Systems: STRUCTURE.
Hyundai applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can become clouded under the PPF. These spots are the result of moist
10230904
Date: 2023-01-30. Type: Service Bulletin/Repair Instructions. Systems: VISIBILITY.
This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary
10217251
Date: 2022-07-28. Type: Service Bulletin/Repair Instructions. Systems: ENGINE AND ENGINE COOLING.
Follow the guidelines outlined in this bulletin to inspect and clean or replace certain components of the engine intake system accordingly during engine short block or sub-assembly replacement.
10217258
Date: 2022-07-14. Type: Service Bulletin/Repair Instructions. Systems: TIRES.
Effective June 2, 2008, Federal Motor Vehicle Safety Standard 110 (FMVSS 110) established a threshold for correcting load carrying capacity information indicated on tire placards when vehicle weight has been increased before retail sale. This limit is the lesser of 1.5% of GVWR or 100 pounds.
10190044
Date: 2021-03-30. Type: Service Bulletin/Repair Instructions. Systems: ENGINE AND ENGINE COOLING, EQUIPMENT.
This bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next required steps.