No complaints are listed for the 2008 Isuzu F-Series. NHTSA's API and bulk file list none in this build.
Data build 2026-10-09.
NHTSA lists this vehicle as ISUZU F-SERIES.
Model-generated complaint tags: No complaints are listed for tagging.
Manufacturer communications
42 manufacturer communications.
Communications by system| System | Count |
|---|
| EQUIPMENT | 18 |
|---|
| ENGINE AND ENGINE COOLING | 12 |
|---|
| ELECTRICAL SYSTEM | 4 |
|---|
| ENGINE | 4 |
|---|
| FUEL SYSTEM, GASOLINE | 3 |
|---|
| EQUIPMENT ADAPTIVE/MOBILITY | 2 |
|---|
| FUEL SYSTEM, OTHER | 2 |
|---|
| FUEL SYSTEM, DIESEL | 1 |
|---|
11007177
Date: 2024-08-14. Type: Other. Systems: ENGINE, POWER TRAIN.
INFORMATION BULLETIN: THIS BULLETIN APPLIES TO ALL OEM AND REMANUFACTURED ENGINE AND TRANSMISSION ASSEMBLIES, FOR THE AFFECTED VEHICLES LISTED ABOVE, TO BE REPLACED UNDER THE ISUZU NEW VEHICLE WARRANTY, GOODWILL, ISUZU PARTS WARRANTY, GOLD STAR USED TRUCK WARRANTY AND/OR ALL EXTENDED POWERTRAIN WARR
10244945
Date: 2023-10-18. Type: Service Bulletin/Repair Instructions. Systems: ENGINE AND ENGINE COOLING.
The following information is provided to clearly explain IsuzuA?A A s policy for control module (engine, transmission, antilock brake, instrument panel, body control, power interface, etc.) reprogramming. Control module calibrations are regularly updated for many reasons. These reasons may include,
10237146
Date: 2023-05-08. Type: Service Bulletin/Repair Instructions. Systems: UNKNOWN OR OTHER.
This bulletin outlines the procedures for using the Alpine Exchange Program (the "Exchange Program"). The Exchange Program must be used when any Alpine radio or other component covered by this bulletin is repaired under warranty and may also be used for radio and component repairs not covered under
10218932
Date: 2022-08-30. Type: Service Bulletin/Repair Instructions. Systems: EQUIPMENT.
Isuzu Commercial Truck of America, Inc. (ICTA) is providing the following procedural recommendations to improve dealer efficiency when submitting Parts Warranty claims. We strongly recommend dealers follow these procedures in order to avoid delays in Parts Warranty claim payments and/or claim charg
10218927
Date: 2022-08-02. Type: Service Bulletin/Repair Instructions. Systems: EQUIPMENT.
Isuzu Commercial Truck of America, Inc. (ICTA) is providing the following procedural recommendations to improve dealer efficiency when submitting Parts Warranty claims. We strongly recommend dealers follow these procedures in order to avoid delays in Parts Warranty claim payments and/or claim charg
10217001
Date: 2022-07-20. Type: Service Bulletin/Repair Instructions. Systems: EQUIPMENT.
The following is a list of the Isuzu-recommended Threebond product part numbers identified in the various Isuzu Workshop Manuals and bulletins. If a Threebond product is unavailable, we recommend that you utilize the chart below to find equivalent of similar products (when available) from Loctite a
10217004
Date: 2022-07-20. Type: Service Bulletin/Repair Instructions. Systems: ENGINE AND ENGINE COOLING, EQUIPMENT, EQUIPMENT ADAPTIVE/MOBILITY.
The Isuzu Commercial Truck of America (ICTA) Service Technical Assistance Center (TAC) provides diagnostic support to Isuzu dealer technicians repairing Isuzu vehicles in and out of vehicle warranty. A TAC case number will be issued solely for information tracking purposes and future contact refere
10176607
Date: 2020-05-08. Type: Service Bulletin/Repair Instructions. Systems: ENGINE, EQUIPMENT ADAPTIVE/MOBILITY, FUEL SYSTEM, GASOLINE.
This technical bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels should be used to reduce carbon build-up.
10175863
Date: 2020-04-20. Type: Service Bulletin/Repair Instructions. Systems: EQUIPMENT, FUEL SYSTEM, GASOLINE.
PROPER INSTALLATION OF THE FUEL INJECTOR PIPES INTO A LONG BLOCK ASSEMBLY THE FUEL INJECTION PIPES SHOULD BE INSTALLED ONTO THE NEW LONG BLOCK ASSEMBLY AFTER FIRST INSTALLING THE COMMON RAIL. WHEN INSTALLING THE FUEL INJECTION PIPES, FOLLOW THE PROCEDURE BELOW TO ENSURE PROPER MATING OF THE FUEL I
10154306
Date: 2019-02-19. Type: Service Bulletin/Repair Instructions. Systems: ENGINE AND ENGINE COOLING.
This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related components. That any of the listed DTC's may set with or without poor