No complaints are listed for the 2022 Kenworth T800B. NHTSA's API and bulk file list none in this build.
Data build 2026-10-09.
NHTSA lists this vehicle as KENWORTH T800B.
Model-generated complaint tags: No complaints are listed for tagging.
Recalls
See new recalls and investigations this week.
5 recalls.
Date: 2024-12-09. Systems: ELECTRICAL SYSTEM, SERVICE BRAKES, HYDRAULIC.
Defect: PACCAR Incorporated (PACCAR) is recalling certain 2021-2025 Peterbilt and Kenworth vehicles, equipped with Bendix EC80 Advanced Electronic Control Units (ECU). Please see the recall report for a complete list of models. Electrical noise and low signal to the power line carrier may cause the ECU to incorrectly process commands or stop functioning.
Consequence: Safety systems that depend on the ECU (Automatic Traction Control, ABS, Electronic Stability Control, Active Cruise Control, and Collison Mitigation System) may not function properly or at all, increasing the risk of a crash.
Remedy: Dealers will reprogram the ECU software, free of charge. Owner notification letters were mailed February 3, 2025. Owners may contact Kenworth's customer service at 1-425-828-5888 and Peterbilt's customer service at 1-940-591-4220. PACCAR's numbers for this recall are 24KWL and 24PBL.
Do not drive: No. Park outside: No.
Date: 2023-10-26. Systems: SEAT BELTS.
Defect: PACCAR Incorporated (PACCAR) is recalling certain 2020 Kenworth T660, 2018-2024 Kenworth T800 and W900 vehicles. An additional spacer may have been added to the joint that connects the seat to the seat belt tether and buckle, causing an unsecured connection.
Consequence: An unsecured seat belt connection may not properly restrain an occupant during a crash, increasing their risk of injury.
Remedy: Dealers will inspect and remove the additional spacer and replace the bolt, as necessary, free of charge. Owner letters were mailed March 20, 2024. Owners may contact PACCAR's customer service at 1-425-828-5888. PACCAR's number for this recall is 23KWK.
Do not drive: No. Park outside: No.
Date: 2022-07-28. Systems: STEERING.
Defect: PACCAR Incorporated (PACCAR) is recalling certain 2022-2023 Kenworth T170, T270, T280, T370, T380, T440, T470, T480, T680, T800, T880, W900, W990, C500, and 2022-2023 Peterbilt 325, 330, 337, 348, 365, 367, 389, 520, 536, 537, 548, 567, and 579 vehicles. The steering gears may have been assembled incorrectly, which can cause the gears to fracture.
Consequence: A fractured steering gear can cause a loss of steering control, increasing the risk of a crash.
Remedy: Dealers will inspect the steering gear serial numbers, and replace the steering gears as necessary, free of charge. Owner notification letters were mailed September 26, 2022. Owners may contact Kenworth's customer service at 1-425-828-5888 and Peterbilt's customer service at 1-940-591-4220. PACCAR's numbers for this recall are 22PBE and 22KWE.
Do not drive: No. Park outside: No.
Date: 2021-04-13. Systems: POWER TRAIN.
Defect: PACCAR Incorporated (PACCAR) is recalling certain 2022 Kenworth T440, T470, T800, and W900 vehicles. The starter interrupt may allow the vehicle to start when the transmission is not in PARK. As such, these vehicles fail to comply with the requirements of the Federal Motor Vehicle Safety Standard number 102, "Transmission shift position sequence, starter interlock, and transmission braking effec (excerpt)
Consequence: Starting the vehicle when the transmission is not in PARK may cause unintended vehicle movement, increasing the risk of a crash. (excerpt)
Remedy: Paccar will notify owners, and dealers will inspect and reconnect the transmission and chassis harness, free of charge. Owner notification letters were mailed on May 26, 2021. Owners may contact PACCAR customer service at 1-425-828-5888. PACCAR's number for this recall is 21KWB. (excerpt)
Do not drive: No. Park outside: No.
Date: 2021-02-17. Systems: ENGINE.
Defect: PACCAR Incorporated (PACCAR) is recalling certain 2021-2022 Kenworth T680, T880, W990, T800, W900 and Peterbilt 579, 567, 389, 367 vehicles equipped with a Cummins X15 engine. The capscrews that attach the flywheel to the crankshaft may have been improperly torqued, allowing the flywheel to detach.
Consequence: A detached flywheel can cause loss of drive power, increasing the risk of a crash. Additionally, driveline pieces may be ejected from the engine compartment, increasing the risk of injury.
Remedy: PACCAR will notify owners, and dealers will properly torque the capscrews and the engine will also be inspected for damage and, if necessary, repaired, free of charge. The recall began on March 29, 2021. Owners may contact PACCAR customer service at 1-425-828-5888 (Kenworth) or 1-940-591-4220 (Peterbilt). PACCAR's numbers for this recall are 21KWA and 21PBB.
Do not drive: No. Park outside: No.
Manufacturer communications
20 manufacturer communications.
Communications by system| System | Count |
|---|
| ENGINE AND ENGINE COOLING | 6 |
|---|
| ENGINE | 3 |
|---|
| EQUIPMENT | 3 |
|---|
| SEAT BELTS | 2 |
|---|
| SEATS | 2 |
|---|
| UNKNOWN OR OTHER | 2 |
|---|
| VISIBILITY | 2 |
|---|
| ELECTRICAL SYSTEM | 1 |
|---|
11037541
Date: 2026-09-11. Type: Service Bulletin/Repair Instructions. Systems: ENGINE.
"Kenworth: Dealers should check the chassis list and SIR weekly for VIN changes. 2 chassis added to the chassis list. Peterbilt: Dealers should check the chassis list and SIR weekly for VIN changes. 10 chassis added to the chassis list."
11036291
Date: 2026-08-13. Type: Service Bulletin/Repair Instructions. Systems: FORWARD COLLISION AVOIDANCE.
The verbiage in the Introduction section has been updated.
11033349
Date: 2026-05-05. Type: Service Bulletin/Repair Instructions. Systems: UNKNOWN OR OTHER.
(KW) Certain T680 / T800 / T880 / W900 / W990 have updated GHG labels available for order and installation.
11032293
Date: 2026-04-17. Type: Service Bulletin/Repair Instructions. Systems: ENGINE.
The attached procedures document has been updated with more detail and explanations. This is not a stand-alone procedure. Cummins Quickserve troubleshooting will specify the use of these procedures while troubleshooting specific fault codes.
11032290
Date: 2026-04-16. Type: Service Bulletin/Repair Instructions. Systems: UNKNOWN OR OTHER.
Bogie Crossmember Torque Value Update - Procedure has been updated to correct torque values.
11028314
Date: 2026-01-31. Type: Service Bulletin/Repair Instructions. Systems: ENGINE.
Procedure pictures updated for clarity. When troubleshooting Cummins X15 fault codes 555 or 556, follow this additional testing, inspection, and documentation procedure to help identify the root cause of dusted engines. This is not a stand-alone process but must be used alongside Cummins troublesho
10254164
Date: 2024-04-09. Type: Service Bulletin/Repair Instructions. Systems: SERVICE BRAKES, AIR.
Certain C500/T440/T470/T660/T680/T800/T880/W900 chassis may have air tank reservoirs that do not meet air volume requirements per FMVSS/CMVSS 121 A A?A A A A Air Brake SystemsA A?A A A A . This bulletin will be updated when repair parts and procedures are available.
10252592
Date: 2024-03-01. Type: Service Bulletin/Repair Instructions. Systems: EQUIPMENT, SEAT BELTS, SEATS.
Safety Recall Repair parts and procedures are now available. On certain Kenworth model years 2018 through 2024 C500/T660/T800/W900 trucks with Sears Atlas 70 or 80 series seats, a spacer was installed on the seatbelt mounting assembly. In a severe collision, the ICP bar may fail, increasing the ris
10245636
Date: 2023-11-28. Type: Service Bulletin/Repair Instructions. Systems: SEAT BELTS, SEATS.
Safety Recall Interim Notification On certain Kenworth model year 2018 through 2024 C500/T660/T800/W900 trucks with Sears Atlas 70 or 80 series seats, an additional spacer was installed on the seatbelt mounting assembly. In a severe collision, the ICP bar may fail allowing the seatbelt to slip, in
10238389
Date: 2023-06-28. Type: Service Bulletin/Repair Instructions. Systems: ENGINE AND ENGINE COOLING, FUEL SYSTEM, GASOLINE.
FIX-AS-FAIL Updated procedures and claim filing information. EPA2021 injector cleaning is referenced in RMI for certain injector faults. Complete the procedures in E290. Refer to E300 for in-tank additive information