Date: 2018-07-11. Systems: ENGINE AND ENGINE COOLING.
Defect: BMW of North America, LLC (BMW) is recalling certain 2018 BMW 540d xDrive vehicles. The crankshaft sensor may be equipped with incorrect firmware, preventing the sensor from properly processing input from the crankshaft reluctor ring, possibly resulting in a vehicle stall. On September 12, 2018, BMW expanded the recall to a total of 5,309 vehicles including certain 2018-2019 BMW 540d xDrive, 2 (excerpt)
Consequence: A vehicle stall can increase the risk of a crash. (excerpt)
Remedy: BMW will notify owners, and dealers will replace the crankshaft sensor, free of charge. The recall began September 6, 2018. Owners may contact BMW customer service at 1-800-525-7417. (excerpt)
Do not drive: No. Park outside: No.
Investigations
0 investigations; 0 open.
Manufacturer communications
5 manufacturer communications.
Communications by system
System
Count
ELECTRICAL SYSTEM
2
ENGINE AND ENGINE COOLING
2
EQUIPMENT
1
FUEL SYSTEM, GASOLINE
1
POWER TRAIN
1
10244507
Date: 2023-10-25. Type: Service Bulletin/Repair Instructions. Systems: ELECTRICAL SYSTEM.
MINI electrical systems have continued to develop over the past few years. As a result, the demand on the batteries has increased. Breakdowns due to an empty battery or problems in the vehicles electrical system can have various causes, most of which are not due to the battery itself. For this rea
10234351
Date: 2023-03-01. Type: Service Bulletin/Repair Instructions. Systems: ELECTRICAL SYSTEM.
Oscillations in the electric drive can occur. As a result, the 12 V positive battery cable may rub against the battery box cover.
10225134
Date: 2022-09-01. Type: Service Bulletin/Repair Instructions. Systems: EQUIPMENT.
Due to a production error, the telematics control units were delivered without an IMS configuration. The Connected Drive voice services (Concierge Call, MINI Assistance and emergency call voice) can no longer be used regionally in the US in vehicle with telematics control units ATM-1 and TCB-4G.
10176383
Date: 2020-05-01. Type: Service Bulletin/Repair Instructions. Systems: ENGINE AND ENGINE COOLING, FUEL SYSTEM, GASOLINE, POWER TRAIN.
TANK VENTILATION AND MIXTURE CONTROL FAULTS STORED IN THE DME: The Engine Malfunction Warning is illuminated and one or more of the following faults are stored in the DME. All models: FC 191C02 - Fuel tank ventilation system 2nd discharge point: malfunction FC 195014 - Differential pressure sensor t
10172512
Date: 2020-02-01. Type: Service Bulletin/Repair Instructions. Systems: ENGINE AND ENGINE COOLING.
WATER INGRESS IN FOOTWELL AREA FROM A/C CONDENSATE DRAIN: This Service Information Bulletin (Revision 1) replaces SI M64 01 16 dated September 2016. The condensate drain hose is blocked by the heat shield - The condensate drain hose is not attached properly to the housing - The condensate drain hose
Notes on this record
Complaints from the API and bulk file are merged and deduplicated by ODI number; the API alone misses records.
System and subsystem counts are numbers of distinct complaints, recalls or communications that name them. One record can name several systems, so shares across systems can add to more than 100 percent; a single share never exceeds 100 percent.
Recalls are counted once per campaign, investigations once per action and manufacturer communications once per NHTSA id, even when NHTSA lists several model names for the same record.
A sales denominator is a calendar-year proxy, not the population of vehicles still in use. Rates are copied from verified pipeline output.
NHTSA's complaints API and bulk file list no complaint for this make, model and model year in this data build.