No complaints are listed for the 2015 Oshkosh S-Series. NHTSA's API and bulk file list none in this build.
Data build 2026-10-09.
NHTSA lists this vehicle as OSHKOSH S-SERIES.
Model-generated complaint tags: No complaints are listed for tagging.
Recalls
See new recalls and investigations this week.
4 recalls.
Date: 2019-02-15. Systems: EXTERIOR LIGHTING.
Defect: Oshkosh Corporation (Oshkosh) is recalling certain 2014-2019 S-Series Glider vehicles equipped with a strobe light package in the rear fender. The strobe lights may have been incorrectly located in the rear fender marker light position, potentially causing confusion for other drivers. As a result, the vehicles fail to comply with Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, (excerpt)
Consequence: Strobe lights in this location may be wrongly interpreted when signaling others, increasing the risk of crash. (excerpt)
Remedy: Oshkosh will notify owners, and replace the strobe lamp with a steady burning lamp, free of charge. The recall began April 10, 2019. Owners may contact Oshkosh customer service at 1-888-686-7278. (excerpt)
Do not drive: No. Park outside: No.
Date: 2015-08-20. Systems: FUEL SYSTEM, OTHER.
Defect: Oshkosh Corporation (Oshkosh) is recalling certain model year 2014-2015 S-Series concrete mixers manufactured July 16, 2014, to June 30, 2015. The affected concrete mixers are powered with compressed natural gas (CNG) and are equipped with pressure relief devices (PRD) that may not function as designed, failing to vent a buildup of pressure, such as could occur if the CNG tank was exposed to fire (excerpt)
Consequence: If the PRD does not activate in the event of a buildup of pressure, the CNG tank may explode, increasing the risk of fire and injury. (excerpt)
Remedy: Oshkosh will notify owners, and dealers will inspect and replace the PRD's, as necessary, free of charge. The recall began on September 25, 2015. Owners may contact Oshkosh customer service at 1-888-686-7278. Oshkosh's number for this recall is Emcara 15E-059. (excerpt)
Do not drive: No. Park outside: No.
Date: 2015-06-30. Systems: POWER TRAIN.
Defect: Oshkosh Corporation (Oshkosh) is recalling certain model year 2015 S-Series Front Discharge concrete mixer glider trucks manufactured February 10, 2015, to March 20, 2015. The affected vehicles have Allison HD4500 transmissions that were remanufactured by Valley Truck Parts that may be coated with a thick layer of paint on the torque converter to adaptation kit mounting surface which can soften d (excerpt)
Consequence: If the mounting bolts loosen, the bolts on the torque converter bolt flange may shear, resulting in a sudden loss of drive power, and increasing the risk of a crash. (excerpt)
Remedy: Oshkosh has notified owners, and Valley Truck Parts will remove the paint from the mating surface of the torque converter, and replace the bolts, free of charge. The recall began on May 8, 2015. Owners may contact Oshkosh customer service at 1-888-686-7278. (excerpt)
Do not drive: No. Park outside: No.
Date: 2015-04-01. Systems: SERVICE BRAKES, AIR.
Defect: Oshkosh Corporation (Oshkosh) is recalling certain model year 2014-2015 S-Series Front Discharge Concrete Mixer vehicles manufactured September 24, 2013, to November 12, 2014. The affected vehicles have air tanks that hold less than the required 12 times the combined volume of the service brake chambers. As a result, these vehicles fail to comply with the requirements of Federal Motor Vehicle Sa (excerpt)
Consequence: With the air tank volume being less than required, in certain situations the vehicle may have an insufficient quantity of air to operate the brakes, increasing the risk of a crash. (excerpt)
Remedy: Oshkosh will notify owners and dealers will install a larger capacity air tank, free of charge. The recall began April 15, 2015. Owners may contact Oshkosh customer service at 1-888-686-7278. Oshkosh's number for this recall is VSR-TSB-010. (excerpt)
Do not drive: No. Park outside: No.
Manufacturer communications
13 manufacturer communications.
Communications by system| System | Count |
|---|
| EQUIPMENT | 4 |
|---|
| POWER TRAIN | 4 |
|---|
| ELECTRICAL SYSTEM | 2 |
|---|
| SUSPENSION | 2 |
|---|
| FUEL SYSTEM, OTHER | 1 |
|---|
10246253
Date: 2023-11-07. Type: Service Bulletin/Repair Instructions. Systems: SUSPENSION.
This bulletin provides instructions for installing new updated front shock absorbers and upper mounting brackets. The updated shock absorber and mounting bracket lowers the top of the shock absorber improving the allowable maximum travel of the front leaf spring pack and keeps the shock absorber
10246254
Date: 2023-11-07. Type: Service Bulletin/Repair Instructions. Systems: EQUIPMENT.
This bulletin provides instructions for installing rubber hose STAUFF clamps in areas of the vehicle that have hard line STAUFF clamps installed on rubber hoses. Rubber hose STAUFF clamps have a smooth inner contact surface and filleted edges. Installing rubber hose STAUFF clamps will reduce pot
10244977
Date: 2023-10-03. Type: Service Bulletin/Repair Instructions. Systems: FUEL SYSTEM, OTHER.
This bulletin provides instruction for installing a hydraulic system charge pump filter.
10240400
Date: 2023-07-24. Type: Service Bulletin/Repair Instructions. Systems: EQUIPMENT.
This bulletin provides information on updating hydraulic hose clamping below the cab to match current production. Engineering recommends changing out the front STAUFF clamp using the following procedure. The second STAUFF clamp can be changed out using this procedure if desired.
10235770
Date: 2023-04-05. Type: Service Bulletin/Repair Instructions. Systems: POWER TRAIN.
This bulletin provides information on topics specific to transmission high temperature warnings reported in the field. The topics listed were helpful in preventing transmission high temperature warning conditions.
10198990
Date: 2021-06-28. Type: Service Bulletin/Repair Instructions. Systems: EQUIPMENT.
This bulletin provides instruction for replacing the water pump impeller due to corrosion. Oshkosh has received reports of non-working water pumps due to the pump impeller becoming corroded and seized, causing the pump not to spin. A new impeller made of an improved alloy was developed to eliminat
10198993
Date: 2021-06-23. Type: Service Bulletin/Repair Instructions. Systems: POWER TRAIN.
This bulletin provides information for vehicle owners that have a Dana series 172 or 175 rear axle without a lubricant drain plug in the bottom of the axle housing.
10198992
Date: 2021-06-16. Type: Service Bulletin/Repair Instructions. Systems: POWER TRAIN.
This bulletin provides instruction for replacing the mixer pump PTO shaft, mixer pump input yoke, and mixer pump input yoke bearing U-bolts to the current production configuration. The new PTO shaft is larger with greaseable crosses and requires a new mixer pump input yoke and replacing the input
10198991
Date: 2021-06-14. Type: Service Bulletin/Repair Instructions. Systems: EQUIPMENT.
This bulletin provides instructions for bolting the water tank mounting feet to the water tank if the bonded feet become loose.
10194921
Date: 2021-05-12. Type: Service Bulletin/Repair Instructions. Systems: ELECTRICAL SYSTEM.
This bulletin provides instruction for checking electrical connections at various critical locations. Loose electrical connections can cause false readings and lead to electrical system errors.