NHTSA lists 8 complaints for the 2003 BMW F650 CS, 1 of them mention a crash and 0 mention a fire. 1 complaints mention an injury, with 1 injuries and 0 deaths reported.
Data build 2026-10-07.
NHTSA lists this vehicle as BMW F650 CS.
Model-generated complaint tags: This model year has not been tagged.
Recalls
4 recalls.
Date: 2004-05-19. Systems: FUEL SYSTEM, GASOLINE.
Defect: ON CERTAIN MOTORCYCLES, THE PLASTIC FUEL PUMP FLANGE COULD COME INTO CONTACT WITH A SUFFICIENT AMOUNT OF ACID OR CHEMICAL COMPOUNDS CONTAINING ACIDIC ELEMENTS, SUCH AS BATTERY ACID OR CERTAIN CLEANING PRODUCTS.
Consequence: THE FLANGE COULD BECOME BRITTLE, CRACK, AND ALLOW FUEL TO ESCAPE FROM THE FUEL TANK. FUEL LEAKAGE, IN THE PRESENCE OF AN IGNITION SOURCE, COULD RESULT IN A FIRE.
Remedy: DEALERS WILL INSTALL AN ACID-RESISTANT CAP OVER THE FUEL PUMP FLANGE. THE RECALL BEGAN JUNE 10, 2004. OWNERS SHOULD CONTACT BMW AT 1-800-831-1117.
Do not drive: No. Park outside: No.
Date: 2002-07-23. Systems: WHEELS.
Defect: ON CERTAIN MOTORCYCLES, IT IS POSSIBLE THAT THE HEX NUT THAT SECURES THE WHEEL TO THE GEARBOX OUTPUT SHAFT WAS TIGHTENED INCORRECTLY DURING THE VEHICLE ASSEMBLY. AS A RESULT, THE NUT COULD LOOSEN DURING VEHICLE OPERATION. IF THIS HAPPENS, THE BELT WHEEL WOULD ITSELF LOOSEN ON THE OUTPUT SHAFT, RESULTING IN DAMAGE TO THE INTERNAL SPLINES OF THE WHEEL AND TO THE EXTERNAL SPLINES OF THE OUTPUT SHAF (excerpt)
Consequence: OVER TIME, THE SPLINES COULD BE DAMAGED TO THE EXTENT THAT THE OUTPUT SHAFT WOULD NOT LONGER OPERATE THE DRIVE BELT, RESULTING IN A LOSS OF DRIVE CAPABILITY AT THE REAR WHEEL. (excerpt)
Remedy: DEALERS WILL INSPECT THE HEX NUT TORQUE AND ADJUST THE TIGHTNESS IF NECESSARY, AND SECURE THE NUT WITH LOCTITE. OWNER NOTIFICATION BEGAN SEPTEMBER 10, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT BMW AT 1-800-831-1117, OPTION #4. (excerpt)
Do not drive: No. Park outside: No.
Date: 2002-07-23. Systems: WHEELS.
Defect: ON CERTAIN MOTORCYCLES, DUE TO A MANUFACTURING DEFECT, IT IS POSSIBLE THAT THE WHEEL COULD DEVELOP A CRACK. OVER TIME, THE CRACK COULD WORSEN TO THE POINT THAT THE WHEEL FAILED AND THE DRIVE BELT DERAILED.
Consequence: THIS WOULD RESULT IN A LOSS OF DRIVE CAPABILITY AT THE REAR WHEEL, INCREASING THE RISK OF A CRASH.
Remedy: DEALERS WILL REPLACE THE REAR DRIVE BELT WHEEL. OWNER NOTIFICATION BEGAN SEPTEMBER 10, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT BMW AT 1-800-831-1117, OPTION #4.
Do not drive: No. Park outside: No.
Date: 2002-05-20. Systems: SERVICE BRAKES, HYDRAULIC.
Defect: ON CERTAIN MOTORCYCLES, THE SCREWS THAT ATTACH THE REAR BRAKE CALIPER TO THE REAR SWING ARM WERE NOT TIGHTENED CORRECTLY DURING ASSEMBLY. THE SCREWS COULD LOOSEN DURING VEHICLE OPERATION AND EVENTUALLY FALL-OUT, ALLOWING THE REAR CALIPER TO SEPARATE FROM ITS MOUNT.
Consequence: IF THE CALIPER BECOMES TRAPPED BETWEEN THE REAR WHEEL AND THE SWING ARM, IT COULD DISCONNECT FROM THE BRAKE LINE, RESULTING IN A LOSS OF REAR BRAKING CAPABILITY AND INCREASING THE RISK OF A CRASH.
Remedy: DEALERS WILL CHECK THE TORQUE OF THE REAR BRAKE CALIPER ATTACHMENT SCREWS AND RETIGHTEN THEM TO THE PROPER VALUE IF NECESSARY. OWNER NOTIFICATION BEGAN JULY 15, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT BMW AT 1-800-831-1117.
Do not drive: No. Park outside: No.
Manufacturer communications
10 manufacturer communications.
Communications by system| System | Count |
|---|
| POWER TRAIN | 3 |
|---|
| ENGINE AND ENGINE COOLING | 2 |
|---|
| EQUIPMENT | 2 |
|---|
| ELECTRICAL SYSTEM | 1 |
|---|
| EXTERIOR LIGHTING | 1 |
|---|
| FUEL SYSTEM, GASOLINE | 1 |
|---|
| FUEL SYSTEM, OTHER | 1 |
|---|
10205110
Date: 2021-11-24. Type: Service Bulletin/Repair Instructions. Systems: EQUIPMENT, POWER TRAIN.
Ball End Working Loose on Gearshift Lever.
10204667
Date: 2021-09-20. Type: Service Bulletin/Repair Instructions. Systems: ELECTRICAL SYSTEM.
One of the following situations can occur when connecting to BN2000 motorcycles: 1. The installed control units cannot be found when reading out with ISTA. 2. Control units initially communicate after connecting to the vehicle, but communication later stops.
10193504
Date: 2013-09-09. Type: Service Bulletin/Repair Instructions. Systems: EQUIPMENT.
Leaks have been reported in fork legs. The cause is reported be from oil lubricating film with accompanying dirt/grease ring is incorrectly interpreted to be a leaking fork leg. Investigations have shown that the part is not defective.
10037025
Date: 2010-08-01. Type: Service Bulletin/Repair Instructions. Systems: EXTERIOR LIGHTING.
BMW: PROCEDURE FOR DETERMINING AND REPLACING INCANDESCENT AND HALOGEN LIGHT BULBS UNDER WARRANTY. *RM
10033130
Date: 2009-12-01. Type: Service Bulletin/Repair Instructions. Systems: FUEL SYSTEM, GASOLINE.
BMW VEHICLES: FUEL LEVEL SENSOR REPAIRS. WHERE IT IS NECESSARY TO REPLACE THE RIGHT OR THE LEFT SIDE FUEL LEVEL SENSOR DUE TO A FAILURE, THE ENTIRE PUMP AND HOUSING OR DELIVERY UNIT (SUCTION JET ASSEMBLY) DO NOT NEED TO BE REPLACED AS WELL. IN SOME CASES, EPC DOES NOT SHOW THAT THE REPAIR KIT IS
10029624
Date: 2009-03-01. Type: Service Bulletin/Repair Instructions. Systems: ENGINE AND ENGINE COOLING.
BMW MOTORCYCLE: THE COOLANT INLET HOSE IS NOT COMPLIANT WITH THE APPLICABLE BMW SPECIFICATIONS. ENGINE OPERATION CAN CAUSE THE INLET HOSE TO WIDEN AND BECOME CORRESPONDINGLY SHORTER; OVERTIME THIS CONTRACTION IN LENGTH CAN CAUSE THE HOSE TO WORK BACK OFF THE WATER PUMP NOZZLE FOR ENOUGH TO ALLOW COO
10030825
Date: 2007-11-01. Type: Service Bulletin/Repair Instructions. Systems: FUEL SYSTEM, OTHER.
BMW MOTORCYCLE: ENGINE FUELS CONTAINING ETHANOL. BMW MOTORRAD HAS NO OBJECTION TO THE USE OF SI ENGINE FUELS CONTAINING UP TO A MAXIMUM OF 10% ETHANOL AND IMPOSES NO WARRANTY RESTRICTIONS. ETHANOL MIXTURES IN PROPORTIONS HIGHER THAN 10% CAN HAVE AN ADVERSE EFFECT ON PERFORMANCE AND CAN RESULT IN
10011019
Date: 2004-10-01. Type: Service Bulletin/Repair Instructions. Systems: POWER TRAIN.
TORQUE SPECIFICATIONS ECCENTRIC CLAMP CONNECTION. BMW F 650 CS. PRODUCTION STARTING NOVEMBER 2003. *TT
10004579
Date: 2003-10-01. Type: Service Bulletin/Repair Instructions. Systems: POWER TRAIN.
WEAR OF SHOCK ABSORBING ELEMENTS IN REAR BELT DRIVE, F650 CS. *TT
10004679
Date: 2003-09-01. Type: Service Bulletin/Repair Instructions. Systems: ENGINE AND ENGINE COOLING.
MUFFLER SLIPPING OFF THE SILENT BLOCK MOUNTING BRACKET. *TT