No complaints are listed for the 2000 GMC B7. NHTSA's API and bulk file list none in this build.
Data build 2026-10-07.
NHTSA lists this vehicle as GMC B7.
Model-generated complaint tags: No complaints are listed for tagging.
Recalls
3 recalls.
Date: 2002-11-04. Systems: ENGINE AND ENGINE COOLING.
Defect: CERTAIN MEDIUM DUTY C-SERIES AND B7 SCHOOL BUS CHASSIS EQUIPPED WITH A 7.4 LITER GAS ENGINE AND AN IMPCO LPG CONVERSION KIT. SOME OF THESE VEHICLES MAY HAVE ENGINE BACKFIRES WITH SUFFICIENT FORCE TO DAMAGE THE ENGINE AIR INTAKE SYSTEM AND THE AIR CLEANER FILTER ELEMENT. (excerpt)
Consequence: IF THE DAMAGED AIR CLEANER PARTS ARE DISLODGED FROM THEIR NORMAL POSITION, THESE PARTS COULD COME IN CONTACT WITH THE HOT EXHAUST MANIFOLD AND/OR HOT EXHAUST GAS RECIRCULATION (EGR) VALVE TUBE RESULTING IN A POSSIBLE ENGINE COMPARTMENT FIRE. (excerpt)
Remedy: DEALERS WILL INSTALL A REDESIGNED MIXER BONNET AND AIR CLEANER HOUSING COVER, SELECTIVE UPGRADES IN VARIOUS CONNECTIONS RELATED TO THE AIR INDUCTION SYSTEM, AND IF NEEDED, A NEW AIR CLEANER FILTER. OWNER NOTIFICATION BEGAN DECEMBER 18, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD (excerpt)
Do not drive: No. Park outside: No.
Date: 2000-09-07. Systems: SERVICE BRAKES, AIR.
Defect: VEHICLE DESCRIPTION: SCHOOL BUSES, MEDIUM DUTY TRUCKS AND TRACTORS BUILT WITH BENDIX AIR ABS WITH AN EC-17 1030R ELECTRONIC CONTROL UNIT (ECU), THERE HAVE BEEN REPORTS OF UNWANTED ABS ACTIVATION AT LOW SPEEDS CAUSED BY 1) CHAFED ABS WHEEL SPEED SENSOR WIRES ON ROTATING PARTS OR 2) A DAMAGED COMPONENT AT THE WHEEL END THAT GENERATES A CERTAIN TYPE OF ERRATIC SENSOR SIGNAL.
Consequence: THIS CONDITION COULD CAUSE THE ABS ECU TO EXHAUST THE AIR AT THE AIR BRAKE MODULATORS FOR ONE OR MORE OF THE WHEELS. THIS COULD RESULT IN EXTENDED BRAKING DISTANCES AND A POSSIBLE CRASH.
Remedy: DEALERS WILL REPLACE THE ABS ECU.
Do not drive: No. Park outside: No.
Date: 2000-08-23. Systems: POWER TRAIN.
Defect: VEHICLE DESCRIPTION: MEDIUM DUTY TRUCKS. THE TRANSMISSION FLUID COULD LEAK FROM A HEAT DEGRADED TRANSMISSION FLUID COOLER HOSE ONTO THE EXHAUST SYSTEM ON THE PASSENGER'S SIDE OF THE VEHICLE.
Consequence: THIS CONDITION COULD RESULT IN A FIRE.
Remedy: DEALERS WILL INSTALL A NEW TRANSMISSION FLUID COOLER INLET HOSE AND OUTLET HOSE DESIGNED WITH A HEAT SLEEVE AND ENSURE ADEQUATE CLEARANCE TO THE EXHAUST SYSTEM TAKE-DOWN PIPE. DEALERS WILL ALSO INSPECT THE RIGHT-HAND EXHAUST MANIFOLD SEAL FOR LEAKAGE, AND REPLACE IF NECESSARY.
Do not drive: No. Park outside: No.
Manufacturer communications
65 manufacturer communications.
Communications by system| System | Count |
|---|
| EQUIPMENT | 21 |
|---|
| ENGINE AND ENGINE COOLING | 16 |
|---|
| ELECTRICAL SYSTEM | 8 |
|---|
| POWER TRAIN | 7 |
|---|
| EQUIPMENT ADAPTIVE/MOBILITY | 6 |
|---|
| ENGINE | 4 |
|---|
| WHEELS | 4 |
|---|
| STEERING | 3 |
|---|
11006621
Date: 2024-08-26. Type: Service Campaign. Systems: ELECTRICAL SYSTEM.
Vehicle Wide Programming (VWP) is a new process to update software on GM Vehicles. It provides the ability via a single selection within Techline Connect to first identify which modules need updating and then proceed to updating affected modules (with some exceptions). The updating of modules is com
11006421
Date: 2024-07-24. Type: Service Bulletin/Repair Instructions. Systems: POWER TRAIN.
GM is receiving damaged (cracked or broken) transmission cores returned to the reman facilities. The damage is being caused either in the removal process by the technician, or inadequate packaging or shipping. This bulletin advises the dealers to be more careful not to damage the transmissions durin
11004761
Date: 2024-06-28. Type: Service Bulletin/Repair Instructions. Systems: ENGINE, FUEL/PROPULSION SYSTEM.
This service bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels should be used to reduce carbon build-up.
11004557
Date: 2024-06-17. Type: Service Bulletin/Repair Instructions. Systems: UNKNOWN OR OTHER.
This bulletin provides information for use on a Product Assistance Claim (PAC), which is formerly known as a Product Allegation Resolution (PAR) claim.
10251890
Date: 2024-03-13. Type: Service Bulletin/Repair Instructions. Systems: ENGINE AND ENGINE COOLING.
This technical bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels should be used to reduce carbon build-up.
10250775
Date: 2024-02-22. Type: Service Bulletin/Repair Instructions. Systems: ENGINE AND ENGINE COOLING.
This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system.
10249590
Date: 2024-01-16. Type: Service Bulletin/Repair Instructions. Systems: EQUIPMENT.
This bulletin provides information for use on a Product Assistance Claim (PAC), which is formerly known as a Product Allegation Resolution (PAR) claim.
10249579
Date: 2024-01-12. Type: Service Bulletin/Repair Instructions. Systems: ENGINE AND ENGINE COOLING, POWER TRAIN.
This PI bulletin advises the technician on the proper way to install the pistons in an engine.
10247552
Date: 2023-12-12. Type: Service Bulletin/Repair Instructions. Systems: EQUIPMENT.
This service bulletin provides information on Concerns or Questions Regarding Installation of Dealer Installed Accessories.
10244274
Date: 2023-10-06. Type: Service Bulletin/Repair Instructions. Systems: WHEELS.
This service bulletin provides information about the Hunter wheel Road Force balancers that should be utilized for all repairs requiring balance and Road Force measurement.