No complaints are listed for the 2022 Hyundai Veloster. Zero is not confirmed in this build. See the source and coverage notes below.
Data build 2026-10-09.
NHTSA lists this vehicle as HYUNDAI VELOSTER.
Model-generated complaint tags: No complaints are listed for tagging.
Manufacturer communications
21 manufacturer communications.
Communications by system| System | Count |
|---|
| ENGINE AND ENGINE COOLING | 5 |
|---|
| POWER TRAIN | 4 |
|---|
| ELECTRICAL SYSTEM | 3 |
|---|
| AIR BAGS | 2 |
|---|
| EQUIPMENT | 2 |
|---|
| TIRES | 2 |
|---|
| VISIBILITY | 2 |
|---|
| ENGINE | 1 |
|---|
11031400
Date: 2026-04-18. Type: Service Bulletin/Repair Instructions. Systems: ELECTRICAL SYSTEM, ENGINE.
Some vehicles may exhibit difficulty starting in cold weather. This bulletin provides the procedure to perform an inspection on the starter magnetic switch for potential freezing and, if necessary, replace the starter magnetic switch (solenoid) assembly.
11032522
Date: 2026-04-10. Type: Other. Systems: AIR BAGS.
The National Highway Traffic Safety Administration (NHTSA) has issued an urgent safety advisory regarding dangerous, counterfeit drivera side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN), that have been identified in U.S. vehicles following prio
11032523
Date: 2026-04-10. Type: Other. Systems: AIR BAGS.
The National Highway Traffic Safety Administration (NHTSA) has identified the presence of substandard and dangerous drivera s-side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN). These inflators were not supplied, approved, or authorized by the ve
11025476
Date: 2025-11-06. Type: Service Bulletin/Repair Instructions. Systems: EXTERIOR LIGHTING.
This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary
10251285
Date: 2024-02-14. Type: Service Bulletin/Repair Instructions. Systems: VISIBILITY, VISIBILITY/WIPER.
This bulletin contains information about the proper removal of the windshield wiper blade protective cover on all models. If the protective cover is not removed correctly, there is a possibility of the rubber insert and rail spring becoming partially separated on the inner side of the wiper blade, w
10247189
Date: 2023-10-13. Type: Service Bulletin/Repair Instructions. Systems: ENGINE AND ENGINE COOLING.
This bulletin provides important checkpoint guidelines when performing engine oil and filter change services.
10241889
Date: 2023-08-28. Type: Service Bulletin/Repair Instructions. Systems: POWER TRAIN.
This bulletin provides information related to a Transmission Control Unit (TCU) software update for certain vehicles equipped with an 8-speed wet dual clutch transmissions (8WDCT) that improves the touch point learning variation. Certain 8WDCTs (indicated by a new part number) received an improved c
10240087
Date: 2023-07-17. Type: Service Bulletin/Repair Instructions. Systems: ELECTRICAL SYSTEM, EQUIPMENT.
This Service Information bulletin provides information on how to update the Apple Carplay software from HyundaiA?A A s Navigation Updates page. The current version of Google Maps has 10 times the data transmission compared to the previous version. As a countermeasure, an update with a frame skip log
10237183
Date: 2023-05-10. Type: Service Bulletin/Repair Instructions. Systems: POWER TRAIN.
This bulletin provides service procedures to prevent possible moisture intrusion of the HP EOP (High Flow Electric Oil Pump) connector when servicing the 8-speed wet dual clutch transmission (8WDCT). If moisture enters the HF EOP connector, this can result in corrosion and insufficient connection of
10235566
Date: 2023-04-24. Type: Service Bulletin/Repair Instructions. Systems: STRUCTURE.
Hyundai applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can become clouded under the PPF. These spots are the result of moist