No complaints are listed for the 2018 Mack Terrapro (mru). NHTSA's API and bulk file list none in this build.
Data build 2026-10-09.
NHTSA lists this vehicle as MACK TERRAPRO (MRU).
Model-generated complaint tags: No complaints are listed for tagging.
Recalls
See new recalls and investigations this week.
1 recalls.
Date: 2021-12-09. Systems: PARKING BRAKE.
Defect: Mack Trucks, Inc. (Mack) is recalling certain 2008-2019 TerraPro (MRU) and 2019-2022 TerraPro (TE) vehicles. A brake control valve air leak into the attached exhaust hose can create excessive back pressure, causing the parking brake to release unexpectedly.
Consequence: The unexpected release of the parking brake may allow the vehicle to rollaway, increasing the risk of a crash.
Remedy: Dealers will remove the exhaust tube and fitting from the valve, free of charge. Owner notification letters were mailed February 8, 2022. Owners may contact Mack customer service at 1-800-866-1177. Mack's number for this recall is SC0433.
Do not drive: No. Park outside: No.
Investigations
1 investigations; 0 open.
PE20003
Opened: 2020-04-01. Closed: 2024-01-10.
Vehicle Roll Away
On April 1, 2020, following information received from the Office of Defects Investigation (ODI) network of fleet contacts, ODI opened PE20-003 to investigate reports of vehicle roll away in certain model year (MY) 2008-2020 Autocar and Mack refuse trucks equipped with certain Bendix PP-1 push-pull pneumatic park brake control valves with a pipe-away exhaust configuration. Prior to ODIa s investig
Systems: PARKING BRAKE, SERVICE BRAKES, AIR.
Linked campaign numbers: 21V953, 23V023.
Manufacturer communications
107 manufacturer communications.
Communications by system| System | Count |
|---|
| ENGINE AND ENGINE COOLING | 47 |
|---|
| ELECTRICAL SYSTEM | 21 |
|---|
| POWER TRAIN | 20 |
|---|
| EQUIPMENT | 10 |
|---|
| SUSPENSION | 7 |
|---|
| FUEL SYSTEM, DIESEL | 6 |
|---|
| UNKNOWN OR OTHER | 6 |
|---|
| SERVICE BRAKES, AIR | 3 |
|---|
10253804
Date: 2024-04-22. Type: Service Bulletin/Repair Instructions. Systems: POWER TRAIN.
CBR: Equipped With An Automated Manual Transmission Model D or F ( AMT-D, AMT-F, mDrive) Missing X1 Value In VDA And Default Settings Guidelines, ParameterP1AOB; Fault Code P1052-54, Error 40,Or Error 18 Encountered During Clutch Or Tran.
10253807
Date: 2024-04-02. Type: Service Bulletin/Repair Instructions. Systems: ENGINE AND ENGINE COOLING.
CBR: Turbo Compound (TC) Hot Side Noise, Diagnostic Information.
10251333
Date: 2024-02-21. Type: Service Bulletin/Repair Instructions. Systems: ELECTRICAL SYSTEM.
CBR -Telematics Gateway (TGW) Connect Ability Issues
10251328
Date: 2024-02-16. Type: Service Bulletin/Repair Instructions. Systems: SUSPENSION.
CBR - Driveline Noise, Suspension Ride Height Too High, Suspension Will Not Exhaust - Chassis Built 2016w01 And Newer.
10251329
Date: 2024-02-16. Type: Service Bulletin/Repair Instructions. Systems: POWER TRAIN.
CBR - Automated Manual Transmission ( AMT ) Flywheel Pilot Bearing Wear On Input Shaft.
10251331
Date: 2024-02-16. Type: Service Bulletin/Repair Instructions. Systems: ELECTRICAL SYSTEM.
CBR - Active "Set Park Brake" Message On Drivers Information Display (DID).
10249553
Date: 2024-01-18. Type: Service Bulletin/Repair Instructions. Systems: ELECTRICAL SYSTEM.
CBR: TGW Will Not Connect After SIM Card Replacement
10249551
Date: 2024-01-17. Type: Service Bulletin/Repair Instructions. Systems: STRUCTURE, SUSPENSION.
CBR: Frame Or Cab Lean
10248101
Date: 2023-12-01. Type: Service Bulletin/Repair Instructions. Systems: ENGINE AND ENGINE COOLING.
CBR: For vehicles equipped with an 11L engine, the plastic saddle bracket holding the a/c line on the left side of the engine may move excessively and rub the area where it secures the line.
10246086
Date: 2023-11-07. Type: Service Bulletin/Repair Instructions. Systems: POWER TRAIN.
TSB: Mack Trucks now offer an improved HD Inter-Axle Through Shaft for the CRD 125, 150, 180, and 200 family carriers. The new HD shaft went into production on January 23rd, 2023 for 2.54 - 3.50 axle ratios and April 1st, 2023 for 3.56 - 3.98 ratios. The new HD through shaft is an upgrade over the c