NHTSA lists 5 complaints for the 2022 Mazda MX-5, 0 of them mention a crash and 0 mention a fire. 0 complaints mention an injury, with 0 injuries and 0 deaths reported.
Data build 2026-10-08.
NHTSA lists this vehicle as MAZDA MX-5.
Model-generated complaint tags
These labels are model-generated, not NHTSA data.
Failure modes| Label | Count | Share of tagged | Mean confidence |
|---|
| electrical electronic | 2 | 40.0% | 0.70 |
|---|
| mechanical failure | 2 | 40.0% | 1.00 |
|---|
| restraint or airbag | 1 | 20.0% | 1.00 |
|---|
Severities| Label | Count | Share of tagged | Mean confidence |
|---|
| moderate | 3 | 60.0% | 0.80 |
|---|
| low | 2 | 40.0% | 0.77 |
|---|
Model: typesafe/jev-1.13-20260917; schema version: tag-v1. 5 tagged complaints of 5 complaints (100.0%).
Confidence is the model's own probability for the label it chose (0 to 1), not accuracy.
Model-generated labels on tagged complaints only. Model years 2013 and newer are tagged in full; 2012 in part (see tagged_share); earlier model years have no tags. NHTSA's own flags remain separate in the complaints block.
Recalls
See new recalls and investigations this week.
1 recalls.
Date: 2024-09-18. Systems: AIR BAGS.
Defect: Mazda North American Operations (Mazda) is recalling certain 2016-2023 MX-5 Miata vehicles. A software error in the air bag control module may cause the front air bags to deploy with excessive force during a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 208, "Occupant Crash Protection."
Consequence: An air bag that deploys with excessive force can increase the risk of injury during a crash.
Remedy: Dealers will update the Sophisticated Air Bag Sensor (SAS) control module software, free of charge. Owner notification letters were mailed November 7, 2024. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 6924I.
Do not drive: No. Park outside: No.
Manufacturer communications
167 manufacturer communications.
Communications by system| System | Count |
|---|
| ELECTRICAL SYSTEM | 56 |
|---|
| UNKNOWN OR OTHER | 42 |
|---|
| EQUIPMENT | 27 |
|---|
| STRUCTURE | 19 |
|---|
| WHEELS | 13 |
|---|
| POWER TRAIN | 12 |
|---|
| SEATS | 10 |
|---|
| ENGINE | 9 |
|---|
11037899
Date: 2026-09-11. Type: Service Bulletin/Repair Instructions. Systems: ELECTRICAL SYSTEM.
DESCRIPTION If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical con
11034447
Date: 2026-06-19. Type: Service Bulletin/Repair Instructions. Systems: ELECTRICAL SYSTEM, ENGINE.
This SA supersedes the previously issued SA(s) listed below. The changes are noted in Red. SA-061/25 12/17/25 DESCRIPTION If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by ask
11034437
Date: 2026-06-18. Type: Service Bulletin/Repair Instructions. Systems: SEATS, STRUCTURE, UNKNOWN OR OTHER.
DESCRIPTION Some vehicles may exhibit scratches (1) on the rear of the seat back bar garnish (2) from contact with the convertible top (3). Due to assembly variations, the clearance between the seat back bar garnish and the convertible top is too small on some vehicles. REPAIR PROCEDURE 6. Install t
11034439
Date: 2026-06-17. Type: Service Bulletin/Repair Instructions. Systems: ELECTRICAL SYSTEM.
This SA supersedes the previously issued bulletin(s) listed below. The changes are noted below in Red. SA-027/26 04/16/26 DESCRIPTION The Mazda DCA-8000 is required for all warranty battery testing. If the Mazda DCA-8000 is not used, incorrect battery testing may result in unnecessary battery replac
11032104
Date: 2026-04-30. Type: Service Bulletin/Repair Instructions. Systems: STRUCTURE, UNKNOWN OR OTHER.
DESCRIPTION Some vehicles may require the replacement of a damaged VIN plate or vehicle certification label. To obtain a replacement VIN plate (bulkhead-mounted and visible through the lower-left area of the windshield), contact DAG (Dealer Assistance Group) using VIN Plate Request Form available on
11032103
Date: 2026-04-21. Type: Service Bulletin/Repair Instructions. Systems: ENGINE, POWER TRAIN, SERVICE BRAKES, UNKNOWN OR OTHER.
This Service Alert supersedes the previously issued SA listed below: The changes are noted in Red. SA-011/24 02/12/24, 06/06/24, 07/29/24 DESCRIPTION Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the sch
11032101
Date: 2026-04-16. Type: Service Bulletin/Repair Instructions. Systems: ENGINE.
This Service Alert supersedes the previously issued M-Tip(s) listed below. The changes are noted in Red text. MT-002/19 09/30/19 and 12/19/19 DESCRIPTION If an engine assembly is replaced after a catastrophic internal mechanical failure, clean the intake manifold internally before installing a repla
11032102
Date: 2026-04-15. Type: Service Bulletin/Repair Instructions. Systems: ELECTRICAL SYSTEM.
This SA supersedes the previously issued bulletin(s) listed below. The changes are noted below in Red. SA-007/25 10/22/25, 06/02/25 and 02/03/25 DESCRIPTION The Mazda DCA-8000 is required for all warranty battery testing. If the Mazda DCA-8000 is not used, incorrect battery testing may result in unn
11030636
Date: 2026-03-11. Type: Service Bulletin/Repair Instructions. Systems: ENGINE.
This Service Alert supersedes the previously issued SA(s) and TSB(s) listed below: The changes are noted in Red. SA-035/24 05/31/24 DESCRIPTION There is a concern that some water pumps are being replaced that are not faulty, due to signs of a very small coolant leak from the bleed hole. This Service
11028101
Date: 2026-01-31. Type: Service Bulletin/Repair Instructions. Systems: ELECTRICAL SYSTEM, STRUCTURE.
Some vehicles may exhibit the power window(s) not working properly (window does not move or has fallen into the door) and/or making an abnormal noise while operating the power window switch. This may be caused by the cable of the power window motor being damaged from water entry through area (1) of