No complaints are listed for the 2021 Mcneilus Manual/ Auto Side Loader. NHTSA's API and bulk file list none in this build.
Data build 2026-10-09.
NHTSA lists this vehicle as MCNEILUS MANUAL/ AUTO SIDE LOADER.
Model-generated complaint tags: No complaints are listed for tagging.
Manufacturer communications
10 manufacturer communications.
Communications by system| System | Count |
|---|
| EQUIPMENT | 4 |
|---|
| FUEL SYSTEM, DIESEL | 2 |
|---|
| SUSPENSION | 2 |
|---|
| ELECTRICAL SYSTEM | 1 |
|---|
| FUEL SYSTEM, GASOLINE | 1 |
|---|
| STRUCTURE | 1 |
|---|
| UNKNOWN OR OTHER | 1 |
|---|
11034876
Date: 2026-06-30. Type: Service Bulletin/Repair Instructions. Systems: UNKNOWN OR OTHER.
McNeilus Truck and Manufacturing provides these instructions for the installation of new bushings for the service cleanout door for all Side Loader refuse vehicles. The new bushings can help provide a tighter seal on the door.
11033189
Date: 2026-04-20. Type: Service Bulletin/Repair Instructions. Systems: STRUCTURE.
McNeilus Truck and Manufacturing provides these instructions for the installation of new bushings for the service cleanout door for all Side Loader refuse vehicles. The new bushings can help provide a tighter seal on the door.
11029968
Date: 2026-02-26. Type: Service Bulletin/Repair Instructions. Systems: SUSPENSION.
McNeilus Truck and Manufacturing requires an inspection and replacement, if needed, to ensure the Bob TailA? HuckA? bolts are fully swaged with correct thread exposure on the rear pivot cross member body mounts. Revision A updates the replacement bolt length to 90mm
11029967
Date: 2026-02-04. Type: Service Bulletin/Repair Instructions. Systems: SUSPENSION.
McNeilus Truck and Manufacturing requires an inspection and replacement, if needed, to ensure the Bob TailA? HuckA? bolts are fully swaged with correct thread exposure on the rear pivot cross member body mounts.
10252426
Date: 2024-03-14. Type: Service Bulletin/Repair Instructions. Systems: FUEL SYSTEM, DIESEL, FUEL SYSTEM, GASOLINE.
According to an amended ruling in the visual inspection labeling requirement in Federal Motor Vehicle Safety Standard (FMVSS) No. 304, the periodic inspection interval for compressed natural gas (CNG) fuel containers has been modified to A?A A at least every 12 months.A?A A McNeilus Truck and Man
10233666
Date: 2023-03-14. Type: Service Bulletin/Repair Instructions. Systems: FUEL SYSTEM, DIESEL.
According to an amended ruling in the visual inspection labeling requirement in Federal Motor Vehicle Safety Standard (FMVSS) No. 304, the periodic inspection interval for compressed natural gas (CNG) fuel containers has been modified to A?A A at least every 12 months.A?A A McNeilus Truck and Man
10222301
Date: 2022-09-27. Type: Service Bulletin/Repair Instructions. Systems: EQUIPMENT.
McNeilus Truck and Manufacturing provides these instructions for installing a hydraulic reservoir cork gasket. The installation of this gasket will repair leaks coming from the gasket between the in-tank filter and the reservoir.
10217058
Date: 2022-07-07. Type: Service Bulletin/Repair Instructions. Systems: EQUIPMENT.
The following information describes how to purge air and release stored hydraulic energy from a hydraulic system. All manual override features are intended for emergency use, not for continuous-duty operation.
10204083
Date: 2021-11-02. Type: Service Bulletin/Repair Instructions. Systems: EQUIPMENT.
McNeilus Truck and Manufacturing offers these instructions for ejector cylinder bypass testing.
10191683
Date: 2021-04-09. Type: Service Bulletin/Repair Instructions. Systems: ELECTRICAL SYSTEM, EQUIPMENT.
The current M/MA software was designed with the pump output for wire 40 and wire 41 backwards. Because of this wiring harness design, the gear pump and vane pump configurations cannot be controlled in the same manner. Software version 8.1.18 or later corrects the programming issue.