NHTSA lists 51 complaints for the 2025 Nissan Pathfinder, 2 of them mention a crash and 0 mention a fire. 3 complaints mention an injury, with 3 injuries and 0 deaths reported.
Data build 2026-10-09.
NHTSA lists this vehicle as NISSAN PATHFINDER.
Model-generated complaint tags
These labels are model-generated, not NHTSA data.
Failure modes| Label | Count | Share of tagged | Mean confidence |
|---|
| loss of control | 14 | 27.5% | 0.85 |
|---|
| mechanical failure | 12 | 23.5% | 0.73 |
|---|
| electrical electronic | 10 | 19.6% | 0.85 |
|---|
| visibility or lighting | 6 | 11.8% | 0.83 |
|---|
| restraint or airbag | 5 | 9.8% | 0.82 |
|---|
| structural or corrosion | 2 | 3.9% | 0.54 |
|---|
| fire or overheating | 1 | 2.0% | 1.00 |
|---|
| fluid or fuel leak | 1 | 2.0% | 1.00 |
|---|
Severities| Label | Count | Share of tagged | Mean confidence |
|---|
| moderate | 45 | 88.2% | 0.85 |
|---|
| high | 3 | 5.9% | 0.87 |
|---|
| low | 3 | 5.9% | 0.61 |
|---|
Model: typesafe/jev-1.13-20260917; schema version: tag-v1. 51 tagged complaints of 51 complaints (100.0%).
Confidence is the model's own probability for the label it chose (0 to 1), not accuracy.
Model-generated labels on tagged complaints only. Model years 2013 and newer are tagged in full; 2012 in part (see tagged_share); earlier model years have no tags. NHTSA's own flags remain separate in the complaints block.
Recalls
See new recalls and investigations this week.
1 recalls.
Date: 2025-03-19. Systems: SERVICE BRAKES, HYDRAULIC.
Defect: Nissan North America, Inc. (Nissan) is recalling certain 2025 Murano, Pathfinder, and INFINITI QX60 vehicles. One or both front brake caliper assemblies may have reduced strength and could break. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 135, "Light Vehicle Brake Systems."
Consequence: A broken front brake caliper can cause a loss of front brake function, increasing the risk of a crash.
Remedy: Dealers will inspect and replace the front brake caliper assemblies as necessary, free of charge. Owner notification letters were mailed May 9, 2025. Owners may contact Nissan's customer service at 800-647-7261 or INFINITI's customer service at 1-800-662-6200. Nissan's numbers for this recall are PD137 and PD138.
Do not drive: No. Park outside: No.
Manufacturer communications
11 manufacturer communications.
Communications by system| System | Count |
|---|
| STRUCTURE | 6 |
|---|
| FUEL/PROPULSION SYSTEM | 2 |
|---|
| ELECTRICAL SYSTEM | 1 |
|---|
| ENGINE | 1 |
|---|
| SERVICE BRAKES | 1 |
|---|
11033026
Date: 2026-05-01. Type: Service Bulletin/Repair Instructions. Systems: FUEL/PROPULSION SYSTEM.
FUEL FILLER TUBE LOWER SEAL IS LEAKING AND DTC P0456 IS STORED IN THE ECM This bulletin is no longer active. Please discard previous versions of NTB26-006.
11033027
Date: 2026-05-01. Type: Service Bulletin/Repair Instructions. Systems: SERVICE BRAKES.
AEB WARNING WITH ONE OR MORE CURRENT DTCS STORED IN THE ADAS CONTROL UNIT 2, AND/OR THE LASER/RADAR CONTROL UNIT IF YOU CONFIRM The front radar is inoperative, the AEB warning is displayed, and one or more of the following DTCs are stored as CURRENT: A? U2752-88 for a Ethernet circuita stored in
11031704
Date: 2026-04-13. Type: Service Bulletin/Repair Instructions. Systems: STRUCTURE.
CERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement a Certification Labela or a VIN Plate/Labela may be needed. HINT: Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label. These items may be
11031705
Date: 2026-04-13. Type: Service Bulletin/Repair Instructions. Systems: STRUCTURE.
CERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement a Certification Labela or a VIN Plate/Labela may be needed. HINT: Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label. These items may be
11031720
Date: 2026-04-13. Type: Service Bulletin/Repair Instructions. Systems: STRUCTURE.
CERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement a Certification Labela or a VIN Plate/Labela may be needed. HINT: Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label. These items may be
11028683
Date: 2026-02-02. Type: Service Bulletin/Repair Instructions. Systems: FUEL/PROPULSION SYSTEM.
FUEL FILLER TUBE LOWER SEAL IS LEAKING AND DTC P0456 IS STORED IN THE ECM IF YOU CONFIRM The vehicle has a visible leak with a smoke machine test coming from the fuel filler tube lower seal, AND DTC P0456 is stored as a Activea , a Pasta , or a Pendinga in the ECM. ACTION 1. Remove the suppli
11028685
Date: 2026-01-22. Type: Service Bulletin/Repair Instructions. Systems: STRUCTURE.
METAL TICKING NOISE AT B-PILLAR IF YOU CONFIRM A metallic ticking noise is coming from the driver (LH) side and/or passenger (RH) side B-Pillar when driving the vehicle on various road surfaces. ACTION Refer to the SERVICE INFORMATION in this bulletin to adjust the inner support of the affected B-Pi
11028691
Date: 2026-01-07. Type: Service Bulletin/Repair Instructions. Systems: ENGINE.
VENT CONTROL VALVE IN ACTIVE TEST INOPERATIVE IN CONSULT 4 SERVICE INFORMATION An issue in CONSULT 4 has been identified in a EVAP system closea in Work support. A? After selecting the "EVAP system close" in Work support, the a VENT CONTROL/Va in Active test becomes non-functional temporarily.
11024391
Date: 2025-10-01. Type: Service Bulletin/Repair Instructions. Systems: STRUCTURE.
ACTION Date: October 2, 2025 To: FOMs, DOMs, RAMs, & RGMs Subject: LAUNCH PD172 PMA55 Multi Model Monroney Bumper Label a QA a Dealer Announcement and Procedure ACTION: FOMs & DOMs are asked to ensure that dealers are aware of this new campaign information. Dealer Announcement:
11024395
Date: 2025-10-01. Type: Service Bulletin/Repair Instructions. Systems: ELECTRICAL SYSTEM.
STEERING WHEEL SWITCH BUTTONS INOPERATIVE, STICKING, OR NOT CLICKING WHEN PRESSED IF YOU CONFIRM The customer states that any of the steering wheel switch buttons are inoperative, sticking, or not clicking when pressed. ACTION Follow the SERVICE PROCEDURE to: 1. Remove the steering wheel assembly. 2