No complaints are listed for the 2018 Triple E RV Wonder. NHTSA's API and bulk file list none in this build.
Data build 2026-10-09.
NHTSA lists this vehicle as TRIPLE E RV WONDER.
Model-generated complaint tags: No complaints are listed for tagging.
Recalls
See new recalls and investigations this week.
5 recalls.
Date: 2021-10-18. Systems: EQUIPMENT.
Defect: Triple E Recreational Vehicles (Triple E) is recalling certain 2015 Free Spirit, 2015-2018 Unity, 2015-2016 Libero, 2015-2018 Serenity, and Wonder recreational vehicles. Please see attached 573 for a complete list of model numbers. The refrigerator exhaust vents directly onto the wood frame and surfaces, which can overheat the wood.
Consequence: An overheated wood frame could ignite and cause a fire.
Remedy: Dealers will install metal heat deflectors and screws, free of charge. Owner notification letters were mailed November 23, 2021. Owners may contact Triple E customer service at 1-877-992-9906. Triple E's number for this recall is CA#8721-1.
Do not drive: No. Park outside: No.
Date: 2018-06-21. Systems: ELECTRICAL SYSTEM.
Defect: Triple E Recreational Vehicles (Triple E) is recalling certain 2017-2018 Wonder recreational vehicles equipped with a trailer tow module. Water can enter the tow modules and corrode the wiring causing issues such as rapidly flashing turn signals, loss of instrument panel display, an electrical short and possibly the deployment of seatbelt pretensioner.
Consequence: An electrical short can increase the risk of a fire. Turn signal, instrument cluster or seatbelt pretensioner problems can increase the risk of a crash.
Remedy: Triple E has notified owners, and dealers will add a drainage hole in the driver's door stepwell and incorporate a fuse into the vehicle's wiring harness, free of charge. The recall began on June 27, 2018. Owners may contact Triple E customer service at 1-877-992-9906 or Ford customer service at 1-866-436-7332. Triple E's number for this recall is CA#9030-1.
Do not drive: No. Park outside: No.
Date: 2018-03-05. Systems: EQUIPMENT.
Defect: Triple E Recreational Vehicles (Triple E) is recalling certain 2017-2018 Unity, Wonder, and Serenity motorhomes. The Occupant & Cargo Carrying Capacity (OCCC) and Tire labels may have been incorrectly calculated, resulting in an indicated a higher cargo capacity than actual.
Consequence: The incorrect label can result in the vehicle being overloaded, increasing the risk of a crash.
Remedy: Triple E will notify owners, and dealers will install new OCCC and Tire labels, free of charge. The recall began on March 22, 2018. Owners may contact Triple E customer service at 1-877-992-9906. Triple E's number for this recall is CA#8930-1.
Do not drive: No. Park outside: No.
Date: 2017-12-04. Systems: SEATS.
Defect: Triple E Recreational Vehicles (Triple E) is recalling certain 2016-2018 Wonder motorhomes, model W24MB. The bolts that fasten the passenger side seat pedestal may be improperly tightened.
Consequence: In the event of a crash, the improperly tightened bolts may cause the passenger side seat pedestal bolts to fail, preventing the passenger from being restrained, increasing their risk of injury.
Remedy: Triple E will notify owners, and dealers will correctly tighten the passenger side seat pedestal mounting bolts, free of charge. The recall began on December 18, 2017. Owners may contact Triple E customer service at 1-204-325-4361. Triple E's number for this recall is CA#8809-1.
Do not drive: No. Park outside: No.
Date: 2017-10-12. Systems: ELECTRICAL SYSTEM.
Defect: Triple E Recreational Vehicles (Triple E) is recalling 2016-2018 Wonder motorhomes, model W24MB. The fridge power supply is not correctly fused.
Consequence: Without fused protection, in the event of an electrical overload, the power supply wire may overheat, increasing the risk of a fire.
Remedy: Triple E will notify owners, and dealers will correctly connect the fridge wire to the 20 amp fuse block, free of charge. The recall began on November 1, 2017. Owners may contact Triple E RV customer service at 1-877-992-9906. Triple E RVA s number for this recall is CA #8764-1.
Do not drive: No. Park outside: No.
Manufacturer communications
7 manufacturer communications.
Communications by system| System | Count |
|---|
| EQUIPMENT | 6 |
|---|
| ELECTRICAL SYSTEM | 2 |
|---|
| LATCHES/LOCKS/LINKAGES | 1 |
|---|
10168825
Date: 2019-11-26. Type: Service Bulletin/Repair Instructions. Systems: EQUIPMENT.
The grey & black tank handle labels are labelled incorrectly. The labels are reversed.
10167309
Date: 2019-10-30. Type: Service Bulletin/Repair Instructions. Systems: LATCHES/LOCKS/LINKAGES.
The retainer nuts that hold the locking pin in place on the murphy bed assembly may become loose resulting in the inside toothed washer to not engage. Ensure the bed locks correctly function in preventing the bed from folding into storage mode by lightly pulling up with the pins engaged when being
10142298
Date: 2018-05-01. Type: Service Bulletin/Repair Instructions. Systems: EQUIPMENT.
Truma Aqua Go Comfort Plus water heater controller cable is incorrectly routed through the rear gas pipe connector opening.
10170078
Date: 2018-05-01. Type: Service Bulletin/Repair Instructions. Systems: ELECTRICAL SYSTEM, EQUIPMENT.
THE TRUMA AQUA GO COMFORT PLUS WATER HEATER CONTROLLER CABLE IS INCORRECTLY ROUTED THROUGH THE REAR GAS PIPE CONNECTOR OPENING. AFFECTS THE WONDER W24MB ONLY.
10135088
Date: 2018-03-29. Type: Service Bulletin/Repair Instructions. Systems: EQUIPMENT.
WiFi Extender router cable plugged into inccorect port. The cable should be plugged into the POE port not the Ethernet port.
10170076
Date: 2018-03-29. Type: Service Bulletin/Repair Instructions. Systems: ELECTRICAL SYSTEM, EQUIPMENT.
THE WIFI EXTENDER ROUTER CABLE IS PLUGGED INTO THE INCORRECT PORT ON THE ROUTER THAT IS INSTALLED ON THE WALL. THE CABLE IS CURRENTLY IN THE POE PORT AND SHOULD BE CONNECTED TO THE ETHERNET PORT. AFFECTS 2018 SERENITY S24CB & 2018 WONDER (ALL MODELS)
10170075
Date: 2018-01-24. Type: Service Bulletin/Repair Instructions. Systems: EQUIPMENT.
THE SCREWS FASTENING THE LOCKING HINGE TO THE BED BASE ARE INCORRECT. THE SCREW TYPE TO USE ARE 1 1/4" #8 MACHINE SCREWS. TAKE OUT THE ORIGINAL SCREWS AND REPLACE WITH THESE MACHINE SCREWS ON THE UNDERSIDE OF THE BED LID. FROM THE UNDERSIDE OF THE LID, PLACE THE ADJUSTABLE ARM OVER THE THE NEW SC