No complaints are listed for the 2021 Fccc MC. NHTSA's API and bulk file list none in this build.
Data build 2026-10-08.
NHTSA lists this vehicle as FCCC MC.
Model-generated complaint tags: No complaints are listed for tagging.
Recalls
See new recalls and investigations this week.
3 recalls.
Date: 2021-11-23. Systems: TIRES.
Defect: Daimler Trucks North America, LLC (DTNA) is recalling certain 2017-2019 Freightliner Custom Chass XCL, 2017-2022 XCM, XCS, 2017-2023 MC, XCR, 2018-2019 XBR, 2018-2020 XBS, 2018-2022 MBC, MT55, S2C, S2G, S2RV vehicles. The tire valve stem extension for the inner wheel may come into contact with the outer wheel rim opening and become damaged. (excerpt)
Consequence: Damage to the valve stem extension may result in a loss of tire pressure of the inner wheel, increasing the risk of a crash. (excerpt)
Remedy: Dealers will remove the inner valve stem extensions and stabilizers, free of charge. Owner notification letters were mailed January 18, 2022. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL912. Note: This recall supersedes and expands recall 20V-529 (FL-861). Vehicles previously repaired under 20V-529 will need to have the new remedy completed un (excerpt)
Do not drive: No. Park outside: No.
Date: 2020-12-21. Systems: SERVICE BRAKES, HYDRAULIC.
Defect: Daimler Trucks North America, LLC (DTNA) is recalling certain 2021 Freightliner Custom Chassis MC, Business Class M2, Custom Chassis MBC Chassis, Custom Chassis S2 Chassis, Custom Chassis MT55 Chassis, and 2022 Custom Chassis Saf-T-Liner C2 vehicles. The hydraulic caliper tie bar support fasteners on the steer axles may not have been properly tightened or the tie bar may have not been installed i (excerpt)
Consequence: A dangling tie bar could come in contact with the rotating wheel-end components or damage may occur from the brake parts flexing. Either scenario may increase the risk of a crash. (excerpt)
Remedy: DTNA will notify owners, and dealers will inspect both steer axle wheel-ends to make sure that the four tie bar mounting fasteners are properly tightened. If the required tie bar is missing, the caliper anchor mounts and functionality (brake pad slide pins and pad movement) will be inspected before installing a tie bar. All repairs will be performed free of charge. The recall began February 18, (excerpt)
Do not drive: No. Park outside: No.
Date: 2020-09-01. Systems: TIRES.
Defect: Daimler Trucks North America LLC (DTNA) is recall certain 2018-2019 Freightliner Custom Chass XCL, 2018-2021 Freightliner XCM chassis, XCS Chassis and MC Chassis and 2017-2021 XCR Chassis. The tire valve stem extension for the inner wheel may come in contact with the outer wheel rim opening and become damaged.
Consequence: Extensive damage to the valve stem extension may result in a loss of tire pressure of the inner wheel, increasing the risk of a crash.
Remedy: DTNA will notify owners and dealer will inspect the inner wheel valve stem stabilizers and adjust as needed, free of charge. If the adjustment does not resolve the issue then the inner valve stem will be replaced, free of charge. The recall began October 29, 2020. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-861.
Do not drive: No. Park outside: No.
Manufacturer communications
3 manufacturer communications.
Communications by system| System | Count |
|---|
| ENGINE | 2 |
|---|
| EQUIPMENT | 1 |
|---|
| EQUIPMENT ADAPTIVE/MOBILITY | 1 |
|---|
| STEERING | 1 |
|---|
11011076
Date: 2024-11-11. Type: Warranty Program/Extension. Systems: ENGINE.
Warranty Information letter for Detroit Line or Line Seal, High Pressure Fuel Injector Standard Repair Time Updates
11010186
Date: 2024-10-17. Type: Other. Systems: ENGINE.
CX Advocate for CARB tightening the Readiness Criteria applied to On-Board Diagnostic (OBD) test submissions for the Clean Truck Check.
10181941
Date: 2020-11-02. Type: Service Bulletin/Repair Instructions. Systems: EQUIPMENT, EQUIPMENT ADAPTIVE/MOBILITY, STEERING.
Customer Advisory Letter for Steering Shaft Pinch Bolt on MC Chassis. Freightliner Custom Chassis has determined that the wrong size pinch bolt may have been installed in the steering shaft on your vehicle. This notice is not considered safety related, but rather a customer notification and recommen