No complaints are listed for the 2008 Hino NJ8J. NHTSA's API and bulk file list none in this build.
Data build 2026-10-09.
NHTSA lists this vehicle as HINO NJ8J.
Model-generated complaint tags: No complaints are listed for tagging.
Recalls
See new recalls and investigations this week.
5 recalls.
Date: 2019-01-18. Systems: SERVICE BRAKES.
Defect: Hino Motors Sales U.S.A., Inc. (Hino) is recalling certain 2007-2019 NJ8J (258ALP) vehicles. These vehicles do not have dust shields on the front brake assemblies. During wet conditions, uneven water saturation on the front brake assemblies may result in the vehicle pulling to the left during hard braking.
Consequence: If the vehicle pulls left, it may cross into another lane unexpectedly, increasing the risk of crash.
Remedy: Hino will notify owners, and dealers will install new brake drums with dust shields, free of charge. The recall began March 19, 2019. Owners may contact Hino customer service at 1-248-699-9390. Hino's number for this recall is AACL0.
Do not drive: No. Park outside: No.
Date: 2012-12-03. Systems: ELECTRICAL SYSTEM.
Defect: Hino is recalling certain model year 2005 through 2013 medium duty trucks, models NA6J, NB6J, NC6J, ND8J, NE8J, NJ8J, NF8J, and NV8J, manufactured from August 18, 2003, through November 16, 2011. Over time, the main B+ circuit from the battery to the starter could potentially short to ground due to wear that accumulates as a result of interference between the B+ circuit and its convoluted tubing (excerpt)
Consequence: If the B+ circuit shorts to ground, it may lead to a fire. (excerpt)
Remedy: Hino will notify owners, and dealers will repair the vehicles free of charge. The recall began on January 17, 2013. Owners may contact Hino at 1-248-699-9390. (excerpt)
Do not drive: No. Park outside: No.
Date: 2008-11-24. Systems: ENGINE AND ENGINE COOLING.
Defect: HINO IS RECALLING 3,836 MY 2008 ND8J, NE8J, NJ8J, AND NV8J CLASS 6 AND 7, CONVENTIONAL CAB, MEDIUM DUTY TRUCKS EQUIPED WITH J08E-TV OR J08E-TW ENGINES. THERE IS AN IMPROPER SHAPE OF THE SUPPLY PUMP COUPLER LOCATED BETWEEN THE SUPPLY PUMP AND THE AIR COMPRESSOR. THE COUPLING MAY CRACK, THE GEAR TRAIN AND VALVES OF THE ENGINE COULD BREAK, AND THE ENGINE COULD STOP RUNNING.
Consequence: THIS WOULD DISABLE THE POWER STEERING SYSTEM, STOP THE SUPPLY OF AIR TO THE AIR TANK, AND MAY RESULT IN INSUFFICIENT BRAKING POWER, INCREASING THE RISK OF A CRASH.
Remedy: DEALERS WILL REPAIR THE COUPLING. THE RECALL BEGAN ON JANUARY 5, 2009. OWNERS MAY CONTACT HINO AT 1-248-699-9330.
Do not drive: No. Park outside: No.
Date: 2008-04-30. Systems: SUSPENSION.
Defect: HINO IS RECALLING 16,805 MY 2005-2008 NA6J, NB6J, NC6J, ND8J, NE8J, NJ8J, AND NV8J TRUCKS. THE TWO VERTICAL RIGHT/LEFT SIDE FRONT SPRING BRACKET BOLTS WERE NOT TIGHTENED PROPERLY DURING THE ASSEMBLY PROCESS. THIS MAY CAUSE INCREASED STRESS ON THE SPRING BRACKET WHICH CAN LEAD TO CRACKING OF THE BRACKET.
Consequence: THIS COULD REDUCE STEERING CONTROL INCREASING THE RISK OF A CRASH.
Remedy: DEALERS WILL REPLACE THE VERTICAL FRONT SPRING BRACKET ATTACHMENT BOLTS ON RIGHT/LEFT HANGER BRACKETS AND RE-TORQUE ALL ASSOCIATED BOLTS FREE OF CHARGE. THE RECALL BEGAN ON SEPTEMBER 8, 2008. OWNERS MAY CONTACT HINO AT 248-699-9300.
Do not drive: No. Park outside: No.
Date: 2007-10-30. Systems: VISIBILITY.
Defect: ON CERTAIN TRUCKS, THE SIDE VIEW MIRRORS MAY HAVE BEEN INSTALLED INCORRECTLY POSSIBLY LEADING TO THE MIRROR GLASS DETACHING FROM THE MIRROR HOUSING.
Consequence: IF THE MIRROR GLASS IS LOST, THE DRIVER MAY NOT BE ABLE TO SEE TRAFFIC APPROACHING FROM THE REAR INCREASING THE RISK OF A CRASH.
Remedy: DEALERS WILL INSPECT THE SIDE VIEW MIRRORS AND, IF NECESSARY, REPLACE THE MIRROR MATERIALS. THE RECALL BEGAN ON JUNE 12, 2007. OWNERS MAY CONTACT HINO AT 1-248-648-6490.
Do not drive: No. Park outside: No.
Manufacturer communications
69 manufacturer communications.
Communications by system| System | Count |
|---|
| EQUIPMENT | 23 |
|---|
| ENGINE AND ENGINE COOLING | 13 |
|---|
| ENGINE | 9 |
|---|
| FUEL SYSTEM, OTHER | 8 |
|---|
| FUEL SYSTEM, GASOLINE | 7 |
|---|
| POWER TRAIN | 6 |
|---|
| ELECTRICAL SYSTEM | 5 |
|---|
| EQUIPMENT ADAPTIVE/MOBILITY | 5 |
|---|
11000897
Date: 2024-05-17. Type: Service Bulletin/Repair Instructions. Systems: UNKNOWN OR OTHER.
After connecting to a truck using DX3, it may be necessary to review or create a DX Diagnostic Report for review.
11000898
Date: 2024-05-15. Type: Service Bulletin/Repair Instructions. Systems: UNKNOWN OR OTHER.
This article will provide dealership technicians with information on how to open a tech assist case and discuss what is required when opening a Tech Assist Case.
10159329
Date: 2019-04-11. Type: Service Bulletin/Repair Instructions. Systems: SERVICE BRAKES, HYDRAULIC.
SA-19-011 AACL0 CONVENTIONAL ALP DRUM AND DUST SHIELD PROCEDURE CHANGES
10119458
Date: 2016-10-19. Type: Service Bulletin/Repair Instructions. Systems: ENGINE.
TT-16-013 The procedure for installing the rocker shaft bolts into the cam housing has been updated. It is recommended to lightly lubricate the threads and flange of the bolts with clean engine oil before installing them. The torque specification has also been reduced as a result of adding lubricant
10116051
Date: 2016-09-28. Type: Service Bulletin/Repair Instructions. Systems: ELECTRICAL SYSTEM, EQUIPMENT, TIRES.
SB - 05 - 004 SPEEDOMETER RECALIBRATION. This document is to inform of the procedure to calibrate the Pulse Adjust Module whenneeded (ex. tire size change, rear carrier ratio change).
10117752
Date: 2016-08-05. Type: Service Bulletin/Repair Instructions. Systems: EQUIPMENT.
SB-16-021 CORRECTION OF WORKSHOP MANUAL FOR HINO600 SERIES Correction of Electrical Wiring Diagram
10117748
Date: 2016-04-18. Type: Service Bulletin/Repair Instructions. Systems: EQUIPMENT.
SB-16-010 Correction of the inspection of the DPR filter.
10116030
Date: 2016-03-22. Type: Service Bulletin/Repair Instructions. Systems: ENGINE, FUEL SYSTEM, GASOLINE.
13-008 Injection Pump Drive Case. Please note the following part number changes to the Injection Pump Bearing Case. Not replacing the correct replacement parts WILL result in major engine damage. The Hino Ordering system has been modified to make the below changes into a kit that consist of the cor
10118109
Date: 2015-06-22. Type: Service Bulletin/Repair Instructions. Systems: STRUCTURE.
TT-15-016 The purpose of this publication is to communicate the standard measuring positions on the Hino chassis. In some cases, the customer may report a visual chassis posture concern where the chassis appears to be leaning more towards the driver side or passenger side. The following publication
10117680
Date: 2015-06-02. Type: Service Bulletin/Repair Instructions. Systems: ENGINE AND ENGINE COOLING.
SB-15-026 A subject vehicle may exhibit an engine oil leak or engine coolant leaking externally from the engine head gasket sealing area on the exhaust manifold side of the engine. An improved head gasket has been made available as a service part and should be used if replacement of the head gasket