No complaints are listed for the 2010 Hino NV8J. NHTSA's API and bulk file list none in this build.
Data build 2026-10-09.
NHTSA lists this vehicle as HINO NV8J.
Model-generated complaint tags: No complaints are listed for tagging.
Recalls
See new recalls and investigations this week.
4 recalls.
Date: 2012-12-03. Systems: ELECTRICAL SYSTEM.
Defect: Hino is recalling certain model year 2005 through 2013 medium duty trucks, models NA6J, NB6J, NC6J, ND8J, NE8J, NJ8J, NF8J, and NV8J, manufactured from August 18, 2003, through November 16, 2011. Over time, the main B+ circuit from the battery to the starter could potentially short to ground due to wear that accumulates as a result of interference between the B+ circuit and its convoluted tubing (excerpt)
Consequence: If the B+ circuit shorts to ground, it may lead to a fire. (excerpt)
Remedy: Hino will notify owners, and dealers will repair the vehicles free of charge. The recall began on January 17, 2013. Owners may contact Hino at 1-248-699-9390. (excerpt)
Do not drive: No. Park outside: No.
Date: 2010-04-16. Systems: POWER TRAIN.
Defect: HINO IS RECALLING CERTAIN MODEL YEAR 2009-2010 NV8J TRUCKS. THE U-JOINT ATTACHMENT BOLTS MAY NOT HAVE BEEN PROPERLY TIGHTENED DURING THE MANUFACTURING PROCESS.
Consequence: IF THE BOLTS WERE TO LOOSEN IT COULD CAUSE A VIBRATION IN THE DRIVELINE. IF THIS VIBRATION WERE IGNORED, THE U-JOINT ATTACHMENT BOLTS COULD SHEAR AND A PORTION OF THE PROPELLER SHAFT COULD SEPARATE FROM THE VEHICLE, THUS FALLING ONTO THE SURFACE OF THE ROADWAY AND BE STRUCK BY A VEHICLE RESULTING IN A CRASH.
Remedy: HINO WILL NOTIFY OWNERS AND DEALERS WILL REPAIR THE VEHICLES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON NOVEMBER 9, 2010. OWNERS MAY CONTACT HINO AT 248-699-9330.
Do not drive: No. Park outside: No.
Date: 2010-04-16. Systems: ENGINE AND ENGINE COOLING.
Defect: HINO IS RECALLING CERTAIN TRUCKS WITH VERTICAL EXHAUST PIPES. CERTAIN BOLTS ATTACHING THE EXHAUST SYSTEM TO THE TRUCK MAY NOT HAVE BEEN PROPERLY TIGHTENED DURING THE MANUFACTURING PROCESS. THE BOLTS COULD FAIL ALLOWING THE EXHAUST SYSTEM TO SEPARATE FROM THE TRUCK.
Consequence: THE EXHAUST SYSTEM COULD FALL ONTO THE ROADWAY AND BE STRUCK BY A FOLLOWING VEHICLE RESULTING IN A CRASH.
Remedy: HINO WILL NOTIFY OWNERS AND DEALERS WILL REPAIR THE VEHICLES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON NOVEMBER 9, 2010. OWNERS MAY CONTACT HINO AT 248-699-9330.
Do not drive: No. Park outside: No.
Date: 2010-04-15. Systems: ENGINE AND ENGINE COOLING.
Defect: HINO IS RECALLING CERTAIN MODEL YEAR 2008-2010 NV8J TRUCKS EQUIPPED WITH ALLISON 3000 RDS AUTOMATIC TRANSMISSION. THE DRIVE COUPLER BOLTS MAY NOT HAVE BEEN PROPERLY TIGHTENED AT THE FACTORY DUE TO THE INCORRECT TOOL POSSIBLY BEING USED DURING THE MANUFACTURING PROCESS.
Consequence: IF THE DRIVE COUPLER BOLTS WERE TO LOOSEN IT COULD CAUSE A VIBRATION IN THE DRIVELINE. IF THIS VIBRATION WERE IGNORED, THE DRIVE COUPLER BOLTS COULD SHEAR AND THE COUPLING BETWEEN THE ENGINE AND TORQUE CONVERTER WOULD NOT TRANSMIT POWER. THIS ULTIMATELY COULD RESULT IN A CRASH.
Remedy: HINO WILL NOTIFY OWNERS AND DEALERS WILL REPAIR THE VEHICLES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON NOVEMBER 9, 2010. OWNERS MAY CONTACT HINO AT 1-248-699-9330.
Do not drive: No. Park outside: No.
Manufacturer communications
45 manufacturer communications.
Communications by system| System | Count |
|---|
| EQUIPMENT | 18 |
|---|
| ENGINE AND ENGINE COOLING | 10 |
|---|
| ENGINE | 9 |
|---|
| POWER TRAIN | 6 |
|---|
| ELECTRICAL SYSTEM | 5 |
|---|
| FUEL SYSTEM, GASOLINE | 4 |
|---|
| EQUIPMENT ADAPTIVE/MOBILITY | 2 |
|---|
| FUEL SYSTEM, OTHER | 2 |
|---|
11000897
Date: 2024-05-17. Type: Service Bulletin/Repair Instructions. Systems: UNKNOWN OR OTHER.
After connecting to a truck using DX3, it may be necessary to review or create a DX Diagnostic Report for review.
11000898
Date: 2024-05-15. Type: Service Bulletin/Repair Instructions. Systems: UNKNOWN OR OTHER.
This article will provide dealership technicians with information on how to open a tech assist case and discuss what is required when opening a Tech Assist Case.
10119458
Date: 2016-10-19. Type: Service Bulletin/Repair Instructions. Systems: ENGINE.
TT-16-013 The procedure for installing the rocker shaft bolts into the cam housing has been updated. It is recommended to lightly lubricate the threads and flange of the bolts with clean engine oil before installing them. The torque specification has also been reduced as a result of adding lubricant
10116051
Date: 2016-09-28. Type: Service Bulletin/Repair Instructions. Systems: ELECTRICAL SYSTEM, EQUIPMENT, TIRES.
SB - 05 - 004 SPEEDOMETER RECALIBRATION. This document is to inform of the procedure to calibrate the Pulse Adjust Module whenneeded (ex. tire size change, rear carrier ratio change).
10117752
Date: 2016-08-05. Type: Service Bulletin/Repair Instructions. Systems: EQUIPMENT.
SB-16-021 CORRECTION OF WORKSHOP MANUAL FOR HINO600 SERIES Correction of Electrical Wiring Diagram
10117748
Date: 2016-04-18. Type: Service Bulletin/Repair Instructions. Systems: EQUIPMENT.
SB-16-010 Correction of the inspection of the DPR filter.
10116030
Date: 2016-03-22. Type: Service Bulletin/Repair Instructions. Systems: ENGINE, FUEL SYSTEM, GASOLINE.
13-008 Injection Pump Drive Case. Please note the following part number changes to the Injection Pump Bearing Case. Not replacing the correct replacement parts WILL result in major engine damage. The Hino Ordering system has been modified to make the below changes into a kit that consist of the cor
10118109
Date: 2015-06-22. Type: Service Bulletin/Repair Instructions. Systems: STRUCTURE.
TT-15-016 The purpose of this publication is to communicate the standard measuring positions on the Hino chassis. In some cases, the customer may report a visual chassis posture concern where the chassis appears to be leaning more towards the driver side or passenger side. The following publication
10117680
Date: 2015-06-02. Type: Service Bulletin/Repair Instructions. Systems: ENGINE AND ENGINE COOLING.
SB-15-026 A subject vehicle may exhibit an engine oil leak or engine coolant leaking externally from the engine head gasket sealing area on the exhaust manifold side of the engine. An improved head gasket has been made available as a service part and should be used if replacement of the head gasket
10118099
Date: 2015-04-13. Type: Service Bulletin/Repair Instructions. Systems: EQUIPMENT.
SB-13-009 This bulletin is to inform dealers and workshops of proper paint codes for all Hino models. ALL MODELS