No complaints are listed for the 2012 Hino NV8J. NHTSA's API and bulk file list none in this build.
Data build 2026-10-09.
NHTSA lists this vehicle as HINO NV8J.
Model-generated complaint tags: No complaints are listed for tagging.
Recalls
See new recalls and investigations this week.
3 recalls.
Date: 2017-09-28. Systems: ENGINE AND ENGINE COOLING.
Defect: Hino Motor Sales U.S.A., Inc. (Hino) is recalling certain 2011-2012 NE8J, NJ8J, and NV8J trucks. The engines have a wrist pin bushings in the connecting rods that may shift and cause excessive cylinder wear.
Consequence: Excessive wear of the cylinders can result in engine failure, increasing the risk of a crash.
Remedy: Hino will notify owners, and dealers will inspect and, as necessary, replace the connecting rods. Interim notices informing owners of the safety risk were mailed November 27, 2017. The recall began on March 19, 2018. Owners may contact Hino customer service at 1-248-699-9300. Hino's number for this recall is AA860.
Do not drive: No. Park outside: No.
Date: 2012-12-03. Systems: ELECTRICAL SYSTEM.
Defect: Hino is recalling certain model year 2005 through 2013 medium duty trucks, models NA6J, NB6J, NC6J, ND8J, NE8J, NJ8J, NF8J, and NV8J, manufactured from August 18, 2003, through November 16, 2011. Over time, the main B+ circuit from the battery to the starter could potentially short to ground due to wear that accumulates as a result of interference between the B+ circuit and its convoluted tubing (excerpt)
Consequence: If the B+ circuit shorts to ground, it may lead to a fire. (excerpt)
Remedy: Hino will notify owners, and dealers will repair the vehicles free of charge. The recall began on January 17, 2013. Owners may contact Hino at 1-248-699-9390. (excerpt)
Do not drive: No. Park outside: No.
Date: 2011-11-03. Systems: POWER TRAIN.
Defect: HINO IS RECALLING CERTAIN MODEL 2012 ND8J, NE8J, NJ8J, AND NV8J COMMERCIAL TRUCKS MANUFACTURED FROM JULY 25, 2011, THROUGH SEPTEMBER 16, 2011. DURING ASSEMBLY, THE WHEEL-END RETAINER ON THE FRONT OR REAR AXLE MAY HAVE BEEN INSTALLED INCORRECTLY.
Consequence: THE WHEEL-HUB AND AXLE SHAFT CAN SEPARATE FROM THE VEHICLE, POSSIBLY RESULTING IN A CRASH.
Remedy: HINO WILL NOTIFY OWNERS, AND DEALERS WILL INSPECT THE FRONT AXLE ASSEMBLIES AND, IF THE AXLE IS FOUND TO BE INCORRECTLY ASSEMBLED, DEALERS WILL REPLACE THE WHEEL END RETAINING HARDWARE FREE OF CHARGE. THE SAFETY RECALL BEGAN ON APRIL 19, 2012. OWNERS MAY CONTACT HINO AT 1-248-699-9390.
Do not drive: No. Park outside: No.
Manufacturer communications
94 manufacturer communications.
Communications by system| System | Count |
|---|
| EQUIPMENT | 38 |
|---|
| ELECTRICAL SYSTEM | 22 |
|---|
| ENGINE AND ENGINE COOLING | 17 |
|---|
| ENGINE | 9 |
|---|
| STRUCTURE | 7 |
|---|
| FUEL SYSTEM, GASOLINE | 6 |
|---|
| EQUIPMENT ADAPTIVE/MOBILITY | 5 |
|---|
| FUEL SYSTEM, DIESEL | 3 |
|---|
11000897
Date: 2024-05-17. Type: Service Bulletin/Repair Instructions. Systems: UNKNOWN OR OTHER.
After connecting to a truck using DX3, it may be necessary to review or create a DX Diagnostic Report for review.
11000898
Date: 2024-05-15. Type: Service Bulletin/Repair Instructions. Systems: UNKNOWN OR OTHER.
This article will provide dealership technicians with information on how to open a tech assist case and discuss what is required when opening a Tech Assist Case.
10117649
Date: 2016-11-04. Type: Service Bulletin/Repair Instructions. Systems: STRUCTURE.
SA-14-026 The broken hood grille procedure (SB-14-020) has been revised to reuse the grille nuts (SZ17906009) if possible. There is a limited quantity of the nuts available and it has been confirmed that the nuts are reusable. The revised procedure has been posted on HinoNet. Please see the picture
10116051
Date: 2016-09-28. Type: Service Bulletin/Repair Instructions. Systems: ELECTRICAL SYSTEM, EQUIPMENT, TIRES.
SB - 05 - 004 SPEEDOMETER RECALIBRATION. This document is to inform of the procedure to calibrate the Pulse Adjust Module whenneeded (ex. tire size change, rear carrier ratio change).
10117753
Date: 2016-08-16. Type: Service Bulletin/Repair Instructions. Systems: ELECTRICAL SYSTEM, FUEL/PROPULSION SYSTEM.
SB-16-022 A subject vehicle may experience an external fuel leak from the burner atomization module assembly, specifically the fuel pressure regulator. This repair procedure outlines replacement of the fuel pressure regulator seals while the atomizer is installed in the vehicle.
10117752
Date: 2016-08-05. Type: Service Bulletin/Repair Instructions. Systems: EQUIPMENT.
SB-16-021 CORRECTION OF WORKSHOP MANUAL FOR HINO600 SERIES Correction of Electrical Wiring Diagram
10117702
Date: 2016-07-14. Type: Service Bulletin/Repair Instructions. Systems: ELECTRICAL SYSTEM.
SB-16-015 Enhanced DCU (Dosing Control Unit) software has been released.Illumination of the check engine light. The DCU may falsely detect an issue and record any of the 3 following DTC?s in the DCU. P142A(DEF pump temperature sensor - Out of range) P204B(DEF pressure sensor ? Rationality) P20A1(
10117701
Date: 2016-05-03. Type: Service Bulletin/Repair Instructions. Systems: FUEL SYSTEM, GASOLINE.
SB-16-007 If DTC(Diagnostic Trouble Code) P0611:Fuel Injector Driver Charge Circuit - Circuit Low has set in the engine ECU(Electronic Control Unit) and the workshop manual diagnostic procedure has led to ECU replacement, an enhanced engine ECU is available to prevent this DTC from recurring. Replac
10117746
Date: 2016-04-20. Type: Service Bulletin/Repair Instructions. Systems: ELECTRONIC STABILITY CONTROL, SERVICE BRAKES, HYDRAULIC, SUSPENSION.
SB-16-006 Some vehicles built before January 2016 and equipped with a leaf spring rear suspension may experience a dislodged or missing spring pad. As an enhancement, the rear axle leaf spring hanger design has been changed to eliminate the spring pad. In the event that one or more spring pads have
10117748
Date: 2016-04-18. Type: Service Bulletin/Repair Instructions. Systems: EQUIPMENT.
SB-16-010 Correction of the inspection of the DPR filter.