Date: 2018-03-15. Systems: ENGINE AND ENGINE COOLING.
Defect: Hino Motor Sales U.S.A., Inc. (Hino) is recalling certain 2018-2019 NE8J, NJ8J, and NV8J trucks. The engine valve train adjustment screw lock nuts may not have been properly tightened manufacturing, possibly resulting in them coming loose within the engine and damaging it.
Consequence: The damage to the engine may result in it shutting off and increasing the risk of a crash.
Remedy: Hino will notify owners, and dealers will inspect the torque on the valve train adjustment screw lock nuts. If a nut is found missing, the engine will be replaced, free of charge. The recall began on May 18, 2018. Owners may contact Hino customer service at 1-248-699-9390. Hino's number for this recall is AA9Q0.
Defect: Hino Motor Sales U.S.A., Inc. (Hino) is recalling certain 2018-2019 NE8J, NJ8J and NV8J trucks. The terminal bolts that secure the main fuse terminals within the fuse block may not have been properly tightened, possibly resulting in electrical arcing and overheating, or an engine shutdown.
Consequence: An electrical arc or overheating can increase the risk of a fire. An engine shutdown can increase the risk of a crash.
Remedy: Hino will notify owners, and dealers will tighten any loose terminal bolts and replace any damaged electrical harness, free of charge. The recall began on March 10, 2018. Owners may contact Hino customer service at 1-248-699-9390. Hino's number for this recall is M0320.
Do not drive: No. Park outside: No.
Investigations
0 investigations; 0 open.
Manufacturer communications
14 manufacturer communications.
Communications by system
System
Count
EQUIPMENT
6
ENGINE
3
ENGINE AND ENGINE COOLING
3
UNKNOWN OR OTHER
2
ELECTRICAL SYSTEM
1
EQUIPMENT ADAPTIVE/MOBILITY
1
POWER TRAIN
1
TIRES
1
11000897
Date: 2024-05-17. Type: Service Bulletin/Repair Instructions. Systems: UNKNOWN OR OTHER.
After connecting to a truck using DX3, it may be necessary to review or create a DX Diagnostic Report for review.
11000898
Date: 2024-05-15. Type: Service Bulletin/Repair Instructions. Systems: UNKNOWN OR OTHER.
This article will provide dealership technicians with information on how to open a tech assist case and discuss what is required when opening a Tech Assist Case.
SB - 05 - 004 SPEEDOMETER RECALIBRATION. This document is to inform of the procedure to calibrate the Pulse Adjust Module whenneeded (ex. tire size change, rear carrier ratio change).
10117660
Date: 2015-01-09. Type: Service Bulletin/Repair Instructions. Systems: EQUIPMENT.
SB-15-002 CORRECTION OF WORKSHOP MANUAL FOR 2013 - 2015MY (REVISION OF TROUBLESHOOTING PROCEDURE FOR THE DTC P2123)
10117661
Date: 2015-01-09. Type: Service Bulletin/Repair Instructions. Systems: EQUIPMENT.
SB-15-003 CORRECTION OF WORKSHOP MANUAL FOR HINO 2015MY (REVISION OF TROUBLESHOOTING PROCEDURE FOR THE DTC P0421)
10116069
Date: 2008-12-05. Type: Service Bulletin/Repair Instructions. Systems: WHEELS.
SB - 08 - 005 This document is to inform dealers and workshops of the design change to the hood damper, support bolt and the addition of a support collar.
10116060
Date: 2006-09-18. Type: Service Bulletin/Repair Instructions. Systems: ENGINE AND ENGINE COOLING.
SB ? 06 - 002 Fuel Filter Usage. This bulletin provides technical information for proper Fuel Filter usage as well as an example of damage caused by foreign material allowed to enter the fuel system as a result of using an improper fuel filter.
10116059
Date: 2006-07-10. Type: Service Bulletin/Repair Instructions. Systems: ENGINE AND ENGINE COOLING.
SB ? 06 - 001 DESIGN CHANGE OF ENGINE OIL COOLER HOUSING. The casting for the engine oil cooler housing has been revised to include 2 shallow machined grooves on both sides of the engine oil cooler housing. These grooves aid in the retention of liquid gasket used during engine production. This chang
10116050
Date: 2005-11-20. Type: Service Bulletin/Repair Instructions. Systems: ENGINE, EQUIPMENT.
05 - 011 CORRECTIONS TO WORKSHOP MANUALS FOR J08 ENGINES. The standard gap between ends of the second piston ring and the oil ring.
10116055
Date: 2005-11-04. Type: Service Bulletin/Repair Instructions. Systems: ENGINE.
SB ? 05 - 008 This document is to inform the dealers about the addition of the pressure sensor cover and related part for the J08E engine.
Notes on this record
Complaints from the API and bulk file are merged and deduplicated by ODI number; the API alone misses records.
System and subsystem counts are numbers of distinct complaints, recalls or communications that name them. One record can name several systems, so shares across systems can add to more than 100 percent; a single share never exceeds 100 percent.
Recalls are counted once per campaign, investigations once per action and manufacturer communications once per NHTSA id, even when NHTSA lists several model names for the same record.
A sales denominator is a calendar-year proxy, not the population of vehicles still in use. Rates are copied from verified pipeline output.
NHTSA's complaints API and bulk file list no complaint for this make, model and model year in this data build.