Defect: ON CERTAIN TRUCKS EQUIPPED WITH A SAF HOLLAND SIMPLEX FIFTH WHEEL, THE LEVER ARM PIVOT BOLT MAY HAVE BEEN OVER TIGHTENED. AN OVER TIGHTENED PIVOT BOLT CAN DISTORT THE PIVOT BOLT SPACER SLEEVE, WHICH MAY PREVENT THE FIFTH WHEEL LATCH JAW FROM CLOSING AND LATCHING SECURELY AROUND THE TRAILER KING PIN.
Consequence: THERE IS A POSSIBILITY THAT THE PIVOT BOLT CAN BECOME LOOSE WITHOUT THE DRIVER'S KNOWLEDGE. WHEN THIS OCCURS, THE DRIVER COULD DRIVE AWAY AND THE TRAILER COULD BECOME DISENGAGED, INCREASING THE RISK OF A CRASH.
Remedy: DEALERS WILL REPLACE THE PIVOT BOLT AND SLEEVE WITH A HEX HEAD SHOULDER BOLT AND WASHER FREE OF CHARGE. THE RECALL BEGAN ON JANUARY 28, 2008. OWNERS MAY CONTACT MACK TRUCKS AT 1-800-528-6586.
Defect: ON CERTAIN TRUCKS EQUIPPED WITH PARKER SINGLE CHECK VALVES (SCV) PROVIDED BY BENDIX. THE DEFECT EXISTS IN THE PARKER SCV THAT CONNECTS WITH THE SUPPLY PORT OF THE SR-7 SPRING BRAKE MODULATING VALVE. AFTER PROLONGED USE OF THE PARKER SCV, THE VALVE BODY RETAINER MAY BECOME EXCESSIVELY WORN AND EVENTUALLY BREAK APART. PIECES OF THE PARKER SCV CAN BECOME LODGED INSIDE THE SR-7 SPRING BRAKE MODULA (excerpt)
Consequence: THIS CONDITION CAN CAUSE A DELAY IN THE APPLICATION OF THE SPRING BRAKES TO PARK THE VEHICLE AFTER THE OPERATOR PULLS THE DASH VALVE BUTTON. THESE CONDITIONS CAN OCCUR WITHOUT WARNING, LEADING TO UNINTENDED VEHICLE ROLLAWAY, BRAKE DRAG, OR IN THE CASE OF LOSS OF PRIMARY CIRCUIT, INABILITY TO MODULATE THE SPRING BRAKES. (excerpt)
Remedy: MACK IS WORKING WITH BENDIX TO REPLACE THE PARKER SINGLE CHECK VALVE. THE RECALL BEGAN ON JANUARY 9, 2008. OWNERS MAY CONTACT BENDIX AT 1-440-329-9000 OR MACK AT 1-800-528-6586. (excerpt)
Defect: ON CERTAIN TRUCKS EQUIPPED WITH BENDIX SR-7 SPRING BRAKE MODULATING VALVES, THE INTERNAL RUBBER CHECK VALVE MAY LEAK CAUSING A DELAY IN THE APPLICATION OF THE SPRING BRAKES TO PARK THE VEHICLE AFTER THE OPERATOR PULLS THE DASH VALVE BUTTON.
Consequence: THIS COULD DELAY OR FAILURE IN APPLYING THE PARKING BRAKES WHICH COULD RESULT IN A VEHICLE ROLL AWAY, INCREASING THE RISK OF A CRASH.
Remedy: MACK IS WORKING WITH BENDIX TO REPAIR THESE VEHICLES (PLEASE SEE 07E037). BENDIX WILL INSTALL A CHECK VALVE REPAIR KIT FOR THE AFFECTED SR-7 SPRING BRAKE MODULATING VALVE FREE OF CHARGE. THE RECALL BEGAN ON JANUARY 10, 2008. OWNERS MAY CONTACT BENDIX AT 1-440-329-9000 OR MACK AT 1-800-528-6586.
Do not drive: No. Park outside: No.
Investigations
0 investigations; 0 open.
Manufacturer communications
63 manufacturer communications.
Communications by system
System
Count
ENGINE AND ENGINE COOLING
20
POWER TRAIN
16
ELECTRICAL SYSTEM
12
EQUIPMENT
7
UNKNOWN OR OTHER
5
VEHICLE SPEED CONTROL
4
SERVICE BRAKES
2
STRUCTURE
2
11032086
Date: 2026-04-09. Type: Service Bulletin/Repair Instructions. Systems: POWER TRAIN.
CBR - Mack Carrier Nut Adhesive Change.
11032092
Date: 2026-04-09. Type: Service Bulletin/Repair Instructions. Systems: POWER TRAIN.
CBR - Mack Chassis - Through Shaft Bearing Retainer Breakage On Mack Carriers.
CBR - Mack Chassis - Engine Brake Only Works With The Brake Pedal, No Function During Cruise. US07 And Newer Emissions, Model Year 2008 And Newer.
11021332
Date: 2025-07-28. Type: Service Bulletin/Repair Instructions. Systems: ELECTRICAL SYSTEM.
CBR - A significant GPS reporting issue is affecting fleet operations, with trucks maintaining back-office communication but failing to transmit GPS location data.
11021333
Date: 2025-07-17. Type: Service Bulletin/Repair Instructions. Systems: ELECTRICAL SYSTEM, SERVICE BRAKES.
CBR - To correct the MID136 SID 66 FMI 7 fault code the latest Bendix VCP file will need to downloaded.
11008366
Date: 2024-09-13. Type: Service Bulletin/Repair Instructions. Systems: SERVICE BRAKES.
CBR: To correct the MID136 SID 66 FMI 7 fault code the latest Bendix VCP fi le will need to be downloaded.
11003042
Date: 2024-06-19. Type: Service Bulletin/Repair Instructions. Systems: ELECTRICAL SYSTEM, UNKNOWN OR OTHER, VEHICLE SPEED CONTROL.
CBR - Accelerator Pedal: Inspection Instructions
10251329
Date: 2024-02-16. Type: Service Bulletin/Repair Instructions. Systems: POWER TRAIN.
CBR - Automated Manual Transmission ( AMT ) Flywheel Pilot Bearing Wear On Input Shaft.
10251331
Date: 2024-02-16. Type: Service Bulletin/Repair Instructions. Systems: ELECTRICAL SYSTEM.
CBR - Active "Set Park Brake" Message On Drivers Information Display (DID).
10246086
Date: 2023-11-07. Type: Service Bulletin/Repair Instructions. Systems: POWER TRAIN.
TSB: Mack Trucks now offer an improved HD Inter-Axle Through Shaft for the CRD 125, 150, 180, and 200 family carriers. The new HD shaft went into production on January 23rd, 2023 for 2.54 - 3.50 axle ratios and April 1st, 2023 for 3.56 - 3.98 ratios. The new HD through shaft is an upgrade over the c
Notes on this record
Complaints from the API and bulk file are merged and deduplicated by ODI number; the API alone misses records.
System and subsystem counts are numbers of distinct complaints, recalls or communications that name them. One record can name several systems, so shares across systems can add to more than 100 percent; a single share never exceeds 100 percent.
Recalls are counted once per campaign, investigations once per action and manufacturer communications once per NHTSA id, even when NHTSA lists several model names for the same record.
A sales denominator is a calendar-year proxy, not the population of vehicles still in use. Rates are copied from verified pipeline output.
NHTSA's complaints API and bulk file list no complaint for this make, model and model year in this data build.