Defect: ON CERTAIN TRUCKS EQUIPPED WITH ASET AC MODEL ENGINES, THE ENGINE AS CONFIGURED WITH AN EXTERNAL EXHAUST GAS RECIRCULATION SYSTEM MAKES SERVICING THE FUEL INJECTION LINES DIFFICULT WHEN USING TRADITIONAL TOOLS. THEREFORE, IT IS POSSIBLE FOR FUEL LEAKS TO DEVELOP WHEN REMOVING AND INSTALLING THE FUEL INJECTION LINES.
Consequence: A LEAK IN THE FUEL INJECTION LINE MAY SPRAY FUEL ON THE HOT SURFACES OF THE EXHAUST GAS RECIRCULATION SYSTEM, WHICH COULD RESULT IN AN ENGINE FIRE.
Remedy: DEALERS WILL REPLACE THE FUEL INJECTION LINES FREE OF CHARGE. NOTE: THIS RECALL SUPERSEDES A PREVIOUS CAMPAIGN CONDUCTED IN 2006 (PLEASE SEE 06V392). THE RECALL BEGAN ON SEPTEMBER 11, 2007, WITH SUBSEQUENT MAILINGS EVERY SIX WEEKS UNTIL APRIL 2008. OWNERS MAY CONTACT MACK AT 800-528-6586.
Defect: ON CERTAIN TRUCKS, A LEAK IN THE ASET AC FUEL INJECTION LINE MAY SPRAY FUEL ON THE EXHAUST GAS RECIRCULATION PIPES THAT CARRY HOT EXHAUST GASES .
Consequence: THIS COULD POTENTIALLY RESULT IN AN ENGINE FIRE.
Remedy: MACK HAS ISSUED A STOP WORK ON THIS CAMPAIGN UNDER FURTHER NOTICE (2-22-2007). THE REMEDY DOES NOT ADEQUATELY ADDRESS THE ISSUE ON ALL VEHICLES. MACK WILL RE-RELEASE THE RECALL IN THE NEAR FUTURE. (PLEASE SEE NHTSA NO. 07V159/MACK RECALL NO. SCO323 FOR VEHICLES THAT HAVE HAD THIS REPAIR ALREADY PERFORMED.) THIS RECALL HAS BEEN SUPERSEDED (PLEASE SEE 07V401/SC0324).
Defect: ON CERTAIN HEAVY DUTY CLASS 8 DIESEL TRUCKS EQUIPPED WITH ASET AC ENGINES, THE LOCATION OF THE FUEL INLET HOSE MAY RESULT IN OVERHEATING OR ABRASION OF THE HOSE, WHICH MAY LEAD TO A PREMATURE FAILURE. (excerpt)
Consequence: IF THE HOSE FAILS, FUEL CAN BE SPRAYED ON THE EXHAUST MANIFOLD, WHICH COULD POTENTIALLY LEAD TO AN ENGINE COMPARTMENT FIRE. (excerpt)
Remedy: DEALERS WILL REPAIR AND REPLACE THE FUEL INLET HOSE FREE OF CHARGE. THE RECALL BEGAN ON FEBRUARY 14, 2005. DUE TO SOME QUALITY AND SUPPLY ISSUES WITH PARTS TO SUPPORT THIS SAFETY RECALL, OWNERS MAY HAVE BEEN INFORMED DURING APRIL 2005,THAT THE SAFETY RECALL WAS ON HOLD. THESE ISSUES HAVE NOW BEEN RESOLVED. FOR OWNERS WHO HAVE NOT HAD THEIR VEHICLE(S) REPAIRED, CONTACT A MACK PARTS AND SERVICE (excerpt)
Do not drive: No. Park outside: No.
Investigations
0 investigations; 0 open.
Manufacturer communications
52 manufacturer communications.
Communications by system
System
Count
ENGINE AND ENGINE COOLING
16
ELECTRICAL SYSTEM
15
POWER TRAIN
7
EQUIPMENT
6
SUSPENSION
6
STRUCTURE
2
UNKNOWN OR OTHER
2
VEHICLE SPEED CONTROL
2
10246086
Date: 2023-11-07. Type: Service Bulletin/Repair Instructions. Systems: POWER TRAIN.
TSB: Mack Trucks now offer an improved HD Inter-Axle Through Shaft for the CRD 125, 150, 180, and 200 family carriers. The new HD shaft went into production on January 23rd, 2023 for 2.54 - 3.50 axle ratios and April 1st, 2023 for 3.56 - 3.98 ratios. The new HD through shaft is an upgrade over the c
10241946
Date: 2023-08-14. Type: Service Bulletin/Repair Instructions. Systems: SUSPENSION.
TSB: Barksdale Leveling Valve, Leak Test
10238788
Date: 2023-06-06. Type: Service Bulletin/Repair Instructions. Systems: ELECTRICAL SYSTEM.
V-MAC III Odometer And Engine Hours Programming
10237339
Date: 2023-05-24. Type: Service Bulletin/Repair Instructions. Systems: EQUIPMENT.
CBR: eWarranty To UCHP Labor Code ( SCC Code ) Crossover, Conversion Information For Use With Campaigns ( FI, PI ) And Recalls ( EC, SC ), Location On Trucks Dealer Portal ( TDP )
10222614
Date: 2022-09-15. Type: Service Bulletin/Repair Instructions. Systems: SUSPENSION.
2008 Document reformated to be published as a TSB in Impact. Torque rod interference.
10219057
Date: 2022-08-06. Type: Service Bulletin/Repair Instructions. Systems: SUSPENSION.
2008 Document reformatted to be published as a TSB in Impact. Rear Suspension Repair.
10219058
Date: 2022-08-06. Type: Service Bulletin/Repair Instructions. Systems: STRUCTURE.
2008 Document reformated to be published as a TSB in Impact. Frame reinforcement plate.
10219059
Date: 2022-08-06. Type: Service Bulletin/Repair Instructions. Systems: POWER TRAIN, STRUCTURE, SUSPENSION.
2007 Document reformatted to be published as a TSB in Impact. Updated Crossmember for improved clearance.
10215287
Date: 2022-06-28. Type: Service Bulletin/Repair Instructions. Systems: ENGINE AND ENGINE COOLING.
Date: 2022-06-22. Type: Service Bulletin/Repair Instructions. Systems: POWER TRAIN.
Automated Manual Transmission ( AMT ) I-Shift / mDRIVE - Ribbon Harness Replacement - Speed Sensor Bolts, Possible Fault Codes P1058 - 21 Or MID 130 PID 161 FMI 1
Notes on this record
Complaints from the API and bulk file are merged and deduplicated by ODI number; the API alone misses records.
System and subsystem counts are numbers of distinct complaints, recalls or communications that name them. One record can name several systems, so shares across systems can add to more than 100 percent; a single share never exceeds 100 percent.
Recalls are counted once per campaign, investigations once per action and manufacturer communications once per NHTSA id, even when NHTSA lists several model names for the same record.
A sales denominator is a calendar-year proxy, not the population of vehicles still in use. Rates are copied from verified pipeline output.
NHTSA's complaints API and bulk file list no complaint for this make, model and model year in this data build.