Defect: MACK IS RECALLING 218 MY 2006-2007 MR TRUCKS. A CHECK VALVE WAS OMITTED FROM THE SECONDARY SUPPLY PORT OF THE SR-7 SPRING BRAKE MODULATING VALVE.
Consequence: AS A RESULT, AN AIR LEAK IN THE SECONDARY OR PRIMARY SYSTEM MAY RESULT IN THE PARK BRAKES INADVERTENTLY APPLYING, INCREASING THE RISK OF A CRASH.
Remedy: DEALERS WILL ADD A CHECK VALVE TO THE SECONDARY SUPPLY PORT OF THE SR-7 SPRING BRAKE MODULATING VALVE AND WILL ALSO REPAIR THE SR-7 VALVE BY APPLYING A CHECK VALVE REPAIR KIT AS REQUIRED FOR THE BENDIX SAFETY RECALL (PLEASE SEE 07E-037). THE RECALL BEGAN ON APRIL 15, 2008. OWNERS MAY CONTACT MACK AT 1-800-528-6586.
Defect: ON CERTAIN TRUCKS EQUIPPED WITH BENDIX SR-7 SPRING BRAKE MODULATING VALVES, THE INTERNAL RUBBER CHECK VALVE MAY LEAK CAUSING A DELAY IN THE APPLICATION OF THE SPRING BRAKES TO PARK THE VEHICLE AFTER THE OPERATOR PULLS THE DASH VALVE BUTTON.
Consequence: THIS COULD DELAY OR FAILURE IN APPLYING THE PARKING BRAKES WHICH COULD RESULT IN A VEHICLE ROLL AWAY, INCREASING THE RISK OF A CRASH.
Remedy: MACK IS WORKING WITH BENDIX TO REPAIR THESE VEHICLES (PLEASE SEE 07E037). BENDIX WILL INSTALL A CHECK VALVE REPAIR KIT FOR THE AFFECTED SR-7 SPRING BRAKE MODULATING VALVE FREE OF CHARGE. THE RECALL BEGAN ON JANUARY 10, 2008. OWNERS MAY CONTACT BENDIX AT 1-440-329-9000 OR MACK AT 1-800-528-6586.
Defect: ON CERTAIN TRUCKS EQUIPPED WITH SR-7 BENDIX BRAKE VALVES, THE CHECK VALVE INSIDE THE VALVE CAVITY MAY NOT PROPERLY SET, CAUSING INTERNAL AIR LEAKAGE. IF THE CHECK VALVE DOES NOT PROPERLY SEAT, THE RESULTING LEAKAGE CAN CAUSE A DELAY IN THE APPLICATION OF THE SPRING BRAKES TO PARK THE VEHICLE AFTER OPERATOR PULLS THE DASH VALVE BUTTON.
Consequence: THE DELAYED PARKING BRAKE APPLICATION CAN OCCUR WITHOUT WARNING, LEADING TO UNINTENDED VEHICLE ROLLAWAY INCREASING THE RISK OF A CRASH.
Remedy: DEALERS WILL INSPECT THE VALVES AND REPLACE IT FREE OF CHARGE. THE RECALL BEGAN ON AUGUST 14, 2006. OWNERS MAY CONTACT MACK TRUCKS AT 1-800-528-6586.
Do not drive: No. Park outside: No.
Investigations
2 investigations; 0 open.
EA09009
Opened: 2009-06-18. Closed: 2010-08-13.
AIR BRAKE SYSTEM CONTROL VALVES
INVESTIGATION HAS NOT IDENTIFIED A DEFECT.COMPLAINTS HAVE ABATED.SEE CLOSING REPORT FOR FURTHER DETAILS.
Systems: SERVICE BRAKES, AIR.
Linked campaign numbers: None listed.
PE09010
Opened: 2009-02-13. Closed: 2009-06-18.
AIR BRAKE CONTROL VALVE
ODI IS CLOSING THIS PRELIMINARY EVALUATION AND OPENING AN ENGINEERING ANALYSIS (EA09-009) TO FURTHER IDENTIFY AND EVALUATE THE VEHICLE ENVIRONMENT AND BRAKE SYSTEM FACTORS THAT MAY BE CAUSING OR CONTRIBUTING TO EXTENDED STOPPING DISTANCE PERFROMANCE IN CERTAIN VEHICLES.
Systems: SERVICE BRAKES, AIR.
Linked campaign numbers: None listed.
Manufacturer communications
49 manufacturer communications.
Communications by system
System
Count
ENGINE AND ENGINE COOLING
17
ELECTRICAL SYSTEM
11
POWER TRAIN
11
EQUIPMENT
5
SUSPENSION
4
UNKNOWN OR OTHER
4
VEHICLE SPEED CONTROL
3
SERVICE BRAKES
2
11032092
Date: 2026-04-09. Type: Service Bulletin/Repair Instructions. Systems: POWER TRAIN.
CBR - Mack Chassis - Through Shaft Bearing Retainer Breakage On Mack Carriers.
11021332
Date: 2025-07-28. Type: Service Bulletin/Repair Instructions. Systems: ELECTRICAL SYSTEM.
CBR - A significant GPS reporting issue is affecting fleet operations, with trucks maintaining back-office communication but failing to transmit GPS location data.
11021333
Date: 2025-07-17. Type: Service Bulletin/Repair Instructions. Systems: ELECTRICAL SYSTEM, SERVICE BRAKES.
CBR - To correct the MID136 SID 66 FMI 7 fault code the latest Bendix VCP file will need to downloaded.
11008366
Date: 2024-09-13. Type: Service Bulletin/Repair Instructions. Systems: SERVICE BRAKES.
CBR: To correct the MID136 SID 66 FMI 7 fault code the latest Bendix VCP fi le will need to be downloaded.
11003042
Date: 2024-06-19. Type: Service Bulletin/Repair Instructions. Systems: ELECTRICAL SYSTEM, UNKNOWN OR OTHER, VEHICLE SPEED CONTROL.
CBR - Accelerator Pedal: Inspection Instructions
10251329
Date: 2024-02-16. Type: Service Bulletin/Repair Instructions. Systems: POWER TRAIN.
CBR - Automated Manual Transmission ( AMT ) Flywheel Pilot Bearing Wear On Input Shaft.
10246086
Date: 2023-11-07. Type: Service Bulletin/Repair Instructions. Systems: POWER TRAIN.
TSB: Mack Trucks now offer an improved HD Inter-Axle Through Shaft for the CRD 125, 150, 180, and 200 family carriers. The new HD shaft went into production on January 23rd, 2023 for 2.54 - 3.50 axle ratios and April 1st, 2023 for 3.56 - 3.98 ratios. The new HD through shaft is an upgrade over the c
10241946
Date: 2023-08-14. Type: Service Bulletin/Repair Instructions. Systems: SUSPENSION.
TSB: Barksdale Leveling Valve, Leak Test
10237339
Date: 2023-05-24. Type: Service Bulletin/Repair Instructions. Systems: EQUIPMENT.
CBR: eWarranty To UCHP Labor Code ( SCC Code ) Crossover, Conversion Information For Use With Campaigns ( FI, PI ) And Recalls ( EC, SC ), Location On Trucks Dealer Portal ( TDP )
10237342
Date: 2023-05-02. Type: Service Bulletin/Repair Instructions. Systems: POWER TRAIN.
Complaints from the API and bulk file are merged and deduplicated by ODI number; the API alone misses records.
System and subsystem counts are numbers of distinct complaints, recalls or communications that name them. One record can name several systems, so shares across systems can add to more than 100 percent; a single share never exceeds 100 percent.
Recalls are counted once per campaign, investigations once per action and manufacturer communications once per NHTSA id, even when NHTSA lists several model names for the same record.
A sales denominator is a calendar-year proxy, not the population of vehicles still in use. Rates are copied from verified pipeline output.
NHTSA's complaints API and bulk file list no complaint for this make, model and model year in this data build.