No complaints are listed for the 2027 Volvo XC60PHEV. NHTSA's API and bulk file list none in this build.
Data build 2026-10-09.
NHTSA lists this vehicle as VOLVO XC60PHEV.
Model-generated complaint tags: No complaints are listed for tagging.
Manufacturer communications
14 manufacturer communications.
Communications by system| System | Count |
|---|
| UNKNOWN OR OTHER | 9 |
|---|
| ENGINE | 2 |
|---|
| EXTERIOR LIGHTING | 1 |
|---|
| FUEL/PROPULSION SYSTEM | 1 |
|---|
| STRUCTURE | 1 |
|---|
11037974
Date: 2026-09-24. Type: Service Bulletin/Repair Instructions. Systems: FUEL/PROPULSION SYSTEM.
This is a TJ - Text only - no attachments - If a customer experiences a DIM message stating "Propulsion System Service Required" or a Turtle indicator in combination with any of the DTCs listed below, Do not replace the IGM. A software solution was introduced with version 5.1.21 follow the instructi
11037969
Date: 2026-09-19. Type: Service Bulletin/Repair Instructions. Systems: UNKNOWN OR OTHER.
This is a TJ - Text only no attachments - If a customer experiences a DIM message stating "Propulsion System Service Required" and DTC IGM P056200 is set, please follow the advice under "Service". Do not replace any parts. This DTC is set due to low 12-volt system voltage. Start by following the ste
11037964
Date: 2026-09-14. Type: Service Bulletin/Repair Instructions. Systems: UNKNOWN OR OTHER.
This is a TJ - text only no attachments - If a customer experiences a DIM message stating "Propulsion System Service Required" and DTC IGM P06B400 is set, please follow the advice under "Service". Verify that the vehicle has software version 5.1.21 or newer. If necessary, update the vehicle's softwa
11037961
Date: 2026-09-12. Type: Service Bulletin/Repair Instructions. Systems: ENGINE.
This is a TJ - text, plus 1 attached PDF - and 2 .MOV files If a noise from the engine occurrs during idling, refer to the attached sound file for reference and comparison; see attachment TJ_37844_1.MOV. If the noise corresponds to the attached sound file, make sure that the fresh air hose is not sq
11036247
Date: 2026-07-28. Type: Service Bulletin/Repair Instructions. Systems: UNKNOWN OR OTHER.
This is a Technical Journal: Text only no attachments - DIM Message and DTC BECM P0C3200. perform a total upgrade of the software please follow the advice under "Service"
11036250
Date: 2026-07-28. Type: Service Bulletin/Repair Instructions. Systems: EXTERIOR LIGHTING.
This is a TJ - text only no attachments - If customer complains of a headlamp error message in DIM, in combination with any of the DTCs stated below, follow advice under "Service".
11036251
Date: 2026-07-28. Type: Service Bulletin/Repair Instructions. Systems: UNKNOWN OR OTHER.
This is a TJ - Text only no attachments - If the software version displayed in the CSD is not aligned with the actual software version installed in the vehicle (this may occur after a failed software download), and no Total Upgrade is available in VIDA, Note! Do not replace any parts. A Software Pro
11036252
Date: 2026-07-28. Type: Service Bulletin/Repair Instructions. Systems: UNKNOWN OR OTHER.
This is a TJ - Text only - No attachments - If the software version displayed in the CSD is not aligned with the actual software version installed in the vehicle (this may occur after a failed software download), and no Total Upgrade is available in VIDA, Note! Do not replace any parts. A Software P
11036240
Date: 2026-07-11. Type: Service Bulletin/Repair Instructions. Systems: UNKNOWN OR OTHER.
This is a Technical Journal: iCUP IHU - Text plus 1 PDF Prior Approval. In most cases, the IHU does not need to be replaced -In many cases the Infotainment Head Unit (IHU) does not need to be replaced and can be retained by following the fault tracing in VIDA.
11036241
Date: 2026-07-11. Type: Service Bulletin/Repair Instructions. Systems: STRUCTURE.
This is a TJ - Text plus 1 .jpg If a customer reports a whistling noise from the front of the vehicle during high-speed driving, starts around 130 km/h or 80 Mph, please see advice under service. Remove the tube sealing from the grille and if remaining adhesive residues, clean the surface using isop