No complaints are listed for the 2010 Mack MRU. NHTSA's API and bulk file list none in this build.
Data build 2026-10-08.
NHTSA lists this vehicle as MACK MRU.
Model-generated complaint tags: No complaints are listed for tagging.
Recalls
See new recalls and investigations this week.
7 recalls.
Date: 2025-01-23. Systems: SERVICE BRAKES, AIR.
Defect: Mack Trucks, Inc. (Mack) is recalling certain 2010-2018 MRU and 2019-2025 Terrapro towing vehicles. The vehicles are missing the anti-lock brake (ABS) warning light and circuitry that controls the anti-lock brake function for an attached trailer. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems."
Consequence: Driving without a functioning anti-lock brake system may result in the trailer not braking as intended, increasing the risk of a crash.
Remedy: Dealers will add an ABS warning light and circuitry, free of charge. Owner notification letters were mailed April 28, 2025. Owners may contact Mack's customer service at 1-800-866-1177. Mack's number for this recall is SC0474.
Do not drive: No. Park outside: No.
Date: 2021-12-09. Systems: PARKING BRAKE.
Defect: Mack Trucks, Inc. (Mack) is recalling certain 2008-2019 TerraPro (MRU) and 2019-2022 TerraPro (TE) vehicles. A brake control valve air leak into the attached exhaust hose can create excessive back pressure, causing the parking brake to release unexpectedly.
Consequence: The unexpected release of the parking brake may allow the vehicle to rollaway, increasing the risk of a crash.
Remedy: Dealers will remove the exhaust tube and fitting from the valve, free of charge. Owner notification letters were mailed February 8, 2022. Owners may contact Mack customer service at 1-800-866-1177. Mack's number for this recall is SC0433.
Do not drive: No. Park outside: No.
Date: 2014-04-18. Systems: EXTERIOR LIGHTING.
Defect: Mack Trucks Inc. (Mack) is recalling certain model year 2010-2014 CHU, CXU, and MRU, 2007 CT and CV, 2008-2014 GU, and 2011-2014 LEU, and TD trucks manufactured February 28, 2006, through November 8, 2013, and equipped Hamsar Electronic Flasher. The hazard warning lights may fail.
Consequence: A failure of the hazard warning lights could reduce the trucks visibility, increasing the risk of a crash.
Remedy: Mack will notify owners, and dealers will replace the electronic flasher unit, free of charge. The recall will begin by mid-June 2014. Interim letters went out to owners on June 23, 2014. The recall began on July 25, 2014. Owners may contact Mack customer service at 1-866-298-6586. Mack's number for this recall is SC0379.
Do not drive: No. Park outside: No.
Date: 2012-02-21. Systems: SUSPENSION.
Defect: MACK IS RECALLING CERTAIN MODEL YEAR 2009-2011 MRU AND MODEL YEAR 2010-2011 LEU VEHICLES, MANUFACTURED FROM JANUARY 1, 2009, THROUGH SEPTEMBER 30, 2010 BECAUSE THE FRONT AXLE MAY CRACK AND FRACTURE.
Consequence: COMPLETE FRACTURES CAN CAUSE THE DRIVER TO LOSE CONTROL OF THE VEHICLE, INCREASING THE RISK OF A CRASH.
Remedy: MACK WILL NOTIFY OWNERS, AND REPLACE THE AXLE BEAMS ON AFFECTED VEHICLES WHEN SUFFICIENT QUANTITIES ARE AVAILABLE. AS AN INTERIM MEASURE, A MAG PARTICLE INSPECTION WILL BE PROVIDED TO MITIGATE RISK AND IDENTIFY VEHICLES WITH CRACKED AXLE BEAMS. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL BEGAN MARCH 30, 2012. OWNERS MAY CONTACT MACK TRUCKS AT 1-800-866-1177.
Do not drive: No. Park outside: No.
Date: 2011-07-20. Systems: STEERING.
Defect: MACK TRUCKS IS RECALLING CERTAIN MODEL YEAR 2009-2012 MRU HEAVY TRUCKS MANUFACTURED FROM NOVEMBER 26, 2008, THROUGH APRIL 26, 2011. THE BOLTS USED TO MOUNT THE STEERING GEAR WERE NOT TIGHTENED TO SPECIFICATION. THE BOLTS CAN LOOSEN WHICH OVER TIME MAY CAUSE THE STEERING GEAR TO DISCONNECT FROM ITS MOUNTING BRACKET.
Consequence: A COMPLETE LOSS OF STEERING MAY OCCUR INCREASING THE RISK OF A VEHICLE CRASH.
Remedy: DEALERS WILL REPLACE THE BOLTS, WHICH WILL BE TIGHTENED TO THE CORRECT SPECIFICATION. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON SEPTEMBER 19, 2011. OWNERS MAY CONTACT MACK TRUCKS AT 1-800-866-1177.
Do not drive: No. Park outside: No.
Date: 2011-04-01. Systems: ELECTRICAL SYSTEM.
Defect: MACK TRUCKS IS RECALLING CERTAIN MODEL YEAR 2008-2012 MRU AND LEU HEAVY TRUCKS MANUFACTURED FROM JANUARY 3, 2007, THROUGH FEBRUARY 3, 2011. THE ELECTRICAL CIRCUITRY IN THESE VEHICLES MAY NOT PROVIDE ADEQUATE OVERCURRENT PROTECTION.
Consequence: IN THE EVENT OF AN ELECTRICAL OVERAGE, THE FUSE THAT SHOULD PREVENT THE OVER CURRENT FROM REACHING THE MIRROR SWITCH CIRCUIT MAY FAIL, SUCH THAT THE MIRROR SWITCH CAN OVERHEAT. AN OVERHEATED SWITCH COULD CAUSE A VEHICLE FIRE.
Remedy: DEALERS WILL INSTALL A RELAY HARNESS TO PREVENT THE MIRROR SWITCH FROM OVERHEATING. THEY WILL ALSO INSPECT THE MIRROR SWITCH AND IF SIGNS OF OVERHEATING ARE SHOWN, REPLACE THAT SWITCH. ALL INSPECTIONS AND REPAIRS WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JUNE 30, 2011. OWNERS MAY CONTACT MACK TRUCKS AT 1-800-866-1177.
Do not drive: No. Park outside: No.
Date: 2010-09-07. Systems: SERVICE BRAKES, AIR.
Defect: MACK IS RECALLING CERTAIN MODEL YEAR 2008 THROUGH 2011 GU AND MRU MODEL VEHICLES MANUFACTURED WITH A FRONT TOW GLAD HAND OPTION. THE ACTUATION AND RELEASE TIMING OF THE VEHICLES EXCEEDS THE LIMIT WHICH FAILS TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 121, "AIR BRAKE SYSTEMS."
Consequence: IF THE BRAKES DO NOT PERFORM AS THEY SHOULD, A VEHICLE CRASH COULD OCCUR.
Remedy: MACK WILL NOTIFY OWNERS AND REPAIR THE VEHICLE FREE OF CHARGE. THE SAFETY RECALL BEGAN ON FEBRUARY 1, 2011. OWNERS MAY CONTACT MACK AT 1-877-800-4945.
Do not drive: No. Park outside: No.
Manufacturer communications
186 manufacturer communications.
Communications by system| System | Count |
|---|
| ENGINE AND ENGINE COOLING | 74 |
|---|
| ELECTRICAL SYSTEM | 38 |
|---|
| EQUIPMENT | 24 |
|---|
| POWER TRAIN | 20 |
|---|
| ENGINE | 19 |
|---|
| FUEL SYSTEM, GASOLINE | 11 |
|---|
| FUEL SYSTEM, OTHER | 10 |
|---|
| SUSPENSION | 9 |
|---|
11032086
Date: 2026-04-09. Type: Service Bulletin/Repair Instructions. Systems: POWER TRAIN.
CBR - Mack Carrier Nut Adhesive Change.
11032092
Date: 2026-04-09. Type: Service Bulletin/Repair Instructions. Systems: POWER TRAIN.
CBR - Mack Chassis - Through Shaft Bearing Retainer Breakage On Mack Carriers.
11028051
Date: 2026-01-08. Type: Service Bulletin/Repair Instructions. Systems: ENGINE, VEHICLE SPEED CONTROL.
CBR - Mack Chassis - Engine Brake Only Works With The Brake Pedal, No Function During Cruise. US07 And Newer Emissions, Model Year 2008 And Newer.
11021332
Date: 2025-07-28. Type: Service Bulletin/Repair Instructions. Systems: ELECTRICAL SYSTEM.
CBR - A significant GPS reporting issue is affecting fleet operations, with trucks maintaining back-office communication but failing to transmit GPS location data.
11021333
Date: 2025-07-17. Type: Service Bulletin/Repair Instructions. Systems: ELECTRICAL SYSTEM, SERVICE BRAKES.
CBR - To correct the MID136 SID 66 FMI 7 fault code the latest Bendix VCP file will need to downloaded.
10251333
Date: 2024-02-21. Type: Service Bulletin/Repair Instructions. Systems: ELECTRICAL SYSTEM.
CBR -Telematics Gateway (TGW) Connect Ability Issues
10251329
Date: 2024-02-16. Type: Service Bulletin/Repair Instructions. Systems: POWER TRAIN.
CBR - Automated Manual Transmission ( AMT ) Flywheel Pilot Bearing Wear On Input Shaft.
10251331
Date: 2024-02-16. Type: Service Bulletin/Repair Instructions. Systems: ELECTRICAL SYSTEM.
CBR - Active "Set Park Brake" Message On Drivers Information Display (DID).
10248101
Date: 2023-12-01. Type: Service Bulletin/Repair Instructions. Systems: ENGINE AND ENGINE COOLING.
CBR: For vehicles equipped with an 11L engine, the plastic saddle bracket holding the a/c line on the left side of the engine may move excessively and rub the area where it secures the line.
10246086
Date: 2023-11-07. Type: Service Bulletin/Repair Instructions. Systems: POWER TRAIN.
TSB: Mack Trucks now offer an improved HD Inter-Axle Through Shaft for the CRD 125, 150, 180, and 200 family carriers. The new HD shaft went into production on January 23rd, 2023 for 2.54 - 3.50 axle ratios and April 1st, 2023 for 3.56 - 3.98 ratios. The new HD through shaft is an upgrade over the c