No complaints are listed for the 2011 Altec Aerial Device. NHTSA's API and bulk file list none in this build.
Data build 2026-10-08.
NHTSA lists this vehicle as ALTEC AERIAL DEVICE.
Model-generated complaint tags: No complaints are listed for tagging.
Recalls
See new recalls and investigations this week.
12 recalls. Showing the latest 10 of 12.
Date: 2024-01-11. Systems: ELECTRICAL SYSTEM.
Defect: Altec Industries, Inc. (Altec) is recalling certain 2004-2023 AT Series aerial devices. The cables in the engine compartment may contact the vehicle's hood, damaging the cables and causing a short circuit.
Consequence: A short circuit increases the risk of a fire.
Remedy: Altec will inspect and relocate the cables and fuse blocks, free of charge. Owner notification letters are expected to be mailed March 8, 2024. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3142.
Do not drive: No. Park outside: No.
Date: 2021-09-23. Systems: EQUIPMENT, STRUCTURE.
Defect: Altec Industries, Inc. (Altec) is recalling certain 2011-2016 AT200A aerial devices. Cracks may develop in the legs of the mounting frame, which can cause the mounting frame side plate to break.
Consequence: A broken side plate may result in pedestal and truck frame separation, increasing the risk of injury.
Remedy: Altec will repair the side plates as necessary, or provide a repair kit, free of charge. Owner notification letters were mailed on October 13, 2021. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 836.
Do not drive: No. Park outside: No.
Date: 2021-06-01. Systems: EQUIPMENT, EQUIPMENT ADAPTIVE/MOBILITY.
Defect: Altec Industries, Inc. (Altec) is recalling certain 2005-2021 A65, A70, A75, A72-T, A77-T, and A82-T vehicles. The lower and upper boom raise spools can shift after releasing the joystick or control interlock.
Consequence: Unintended movement of the lower and upper booms increases the risk of injury.
Remedy: Altec will install a jumper hose and check valve into the boomtip tank lines and replace the overcenter blocking cartridge with an internally referenced drain path, free of charge. Owner notification letters were mailed on July 28, 2021. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 823.
Do not drive: No. Park outside: No.
Date: 2019-06-21. Systems: SERVICE BRAKES, AIR.
Defect: Altec Industries Inc. (Altec) is recalling certain 2003-2019 Altec TA45, TA50, TA55, TA60, L37, L39, LRV, LR7, A-T40C, T40P and AP45 vehicles equipped with air-cushioned pintle hitch and/or accessory air components. The accessories utilizing chassis air supply may be missing pressure protection valves. The accessory lines may not prevent service brake line pressure loss due to failure or leakage (excerpt)
Consequence: Loss of service brake pressure can increase the risk of a crash. (excerpt)
Remedy: Altec will notify owners, and dealers will inspect the pressure protection installation and repair any unit that does not pass inspection, free of charge. The recall began August 15, 2019. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 724. (excerpt)
Do not drive: No. Park outside: No.
Date: 2018-08-22. Systems: STRUCTURE.
Defect: Altec Industries Inc. (Altec) is recalling certain 2008-2018 Aerial Devices equipped with aluminum work platforms. The platform mounting holes may fail, causing the platform to move unexpectedly.
Consequence: If the platform moves unexpectedly, it can increase the risk of injury.
Remedy: Altec will notify owners, and dealers will install a bracket reinforcing kit, free of charge. The recall is expected to begin October 17, 2018. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 689.
Do not drive: No. Park outside: No.
Date: 2018-02-14. Systems: EQUIPMENT.
Defect: Altec Industries Inc. (Altec) is recalling certain 1997-2017 LRV, and LR7 Aerial devices. The platform leveling yoke may fail, possibly causing an occupant to fall from the platform.
Consequence: Failure of the platform leveling yoke can cause the occupant of the platform to fall out, increasing their risk of injury.
Remedy: Altec will notify owners, and will inspect the leveling system to verify the correct alignment, replacing any improperly aligned yokes, free of charge. The recall began on April 11, 2018. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 672.
Do not drive: No. Park outside: No.
Date: 2017-09-11. Systems: EQUIPMENT.
Defect: Altec Industries Inc. (Altec) is recalling certain 2011-2017 Altec LS63 Aerial Devices. The jib mast on these vehicles may bend under load.
Consequence: The jib mast may bend and fail, increasing the risk of injury to those nearby.
Remedy: Altec will notify owners and test the jib mast, replacing any that fail, free of charge. The recall began on October 13, 2017. Owners may contact Altec customer service at 1-205-991-7733. Altec's number for this recall is CSN 664.
Do not drive: No. Park outside: No.
Date: 2015-07-28. Systems: EQUIPMENT.
Defect: Altec Industries Inc. (Altec) is recalling certain model year 2006-2015 Aerial Devices manufactured from June 1, 2006, through April 1, 2015. The affected aerial devices outrigger interlock control system may not detect proper deployment of the outriggers, allowing for instability of the boom.
Consequence: If the aerial device is operated while the outrigger is not properly deployed it can cause instability of the boom, increasing the risk of person injury or death.
Remedy: Altec will notify owners, and dealers will replace the aerial device with a new outrigger interlock module, free of charge. The recall began on September 4, 2015. Owners may contact Altec customer service at 1-205-991-7733. Altec's number for this recall is CSN 625.
Do not drive: No. Park outside: No.
Date: 2015-02-19. Systems: EQUIPMENT.
Defect: Altec Industries, Inc. (Altec) is recalling certain model year 2011-2014 Aerial Devices, models L36A, LRV, and LR7, manufactured June 1, 2011, to September 30, 2014, and built with Texas Hydraulics upper boom drive cylinders. In the affected aerial devices, the cylinder base end lug casting may develop cracks. (excerpt)
Consequence: If the cylinder lug castings crack, they may fail, resulting in unintended movement of the boom, increasing the risk of personal injury or death to the aerial device user or those nearby. (excerpt)
Remedy: Altec will notify owners, and dealers will inspect the cylinders for specific casting suspect lots. If both upper boom drive cylinders are not of the suspect lots, no further action is required. If a cylinder is found to be of one of the suspect lots, it will be inspected for visible cracks. If cracks are found the unit should be removed from service immediately and the cylinder will be replaced (excerpt)
Do not drive: No. Park outside: No.
Date: 2014-11-21. Systems: EQUIPMENT.
Defect: Altec Industries Inc. (Altec) is recalling certain model year 1999-2014 aerial devices models A65, A70, A75, A72-, A/77-T, A82-T, A72-TE88, and A77-TE93 manufactured January 1, 1999, to July 15, 2014. The affected aerial devices may have an improperly set hydraulic pressure transducer which relieves excessive backpressure in the hydraulic tank circuit.
Consequence: In cooler temperatures, the improperly set hydraulic pressure transducer may result in inadvertent boom movement, increasing the risk of injury to the occupant or those nearby.
Remedy: Altec will notify owners, and dealers will replace and install a pressure switch, free of charge. The recall began in January 16, 2015. Owners may contact Altec customer service at 1-205-991-7733. Altec's number for this recall is CSN 609.
Do not drive: No. Park outside: No.
Manufacturer communications
10 manufacturer communications.
Communications by system| System | Count |
|---|
| EQUIPMENT | 6 |
|---|
| STRUCTURE | 3 |
|---|
| ELECTRICAL SYSTEM | 1 |
|---|
| EQUIPMENT ADAPTIVE/MOBILITY | 1 |
|---|
| EXTERIOR LIGHTING | 1 |
|---|
| SEAT BELTS | 1 |
|---|
| UNKNOWN OR OTHER | 1 |
|---|
11001160
Date: 2024-06-21. Type: Service Bulletin/Repair Instructions. Systems: ELECTRICAL SYSTEM, EXTERIOR LIGHTING, UNKNOWN OR OTHER.
Altec has learned that a 12-volt Airtronics relay installed in the PDM could have been manufactured to an insufficient threshold on certain units built from December 2004 to October 2022. This can cause the relay to overheat and fail, causing the accessory lights to stop working.
10238374
Date: 2023-06-28. Type: Service Bulletin/Repair Instructions. Systems: EQUIPMENT.
Altec has learned that certain digger derricks and aerial devices of various models built from January 2010 to January 2023 may contain access steps with a handrail and side plate that come together in a small space causing a potential pinch point. Altec has created a kit to eliminate the possible p
10235128
Date: 2023-04-28. Type: Service Bulletin/Repair Instructions. Systems: EQUIPMENT.
Altec has learned that the hydraulic ball valve on the hydraulic reservoir return line of certain L42/45 M/P units built from February 2002 to November 2019 might not get returned to the open position after being turned to the closed position for maintenance. If the upper boom drive system is articu
10222578
Date: 2022-10-05. Type: Service Bulletin/Repair Instructions. Systems: EQUIPMENT.
Product advisory posted on our web site to inform owners, user, & operators that the new ANSI A92.2-2021 standard has taken effect and they must review. The standard has changed some of the responsibilities of the parties who use or operate vehicle mounted aerial devices.
10218664
Date: 2022-08-04. Type: Service Bulletin/Repair Instructions. Systems: SEAT BELTS.
Altec Industries, Inc. has received notification from Ford Motor Company that a condition exists relating to motor vehicle safety, compliance, or emissions in a vehicle you possess that is equipped with Altec equipment. In certain 2011 through 2013 and 2015 model year F-650 and F-750 vehicles wi
10210534
Date: 2022-04-27. Type: Service Bulletin/Repair Instructions. Systems: EQUIPMENT.
Altec has learned that the electrohydraulic outrigger/tools control valve on AA755L and A-series aerial devices and DLB, DMB, and D2/3/4000B series digger derricks could have the potential to produce a very small amount of flow into the lower tools circuit when the outriggers and tools mode is engag
10186513
Date: 2021-01-29. Type: Service Bulletin/Repair Instructions. Systems: STRUCTURE.
There may be inadequate weld fusion between the boom extension cylinder rod and rod end on the affected units. This can lead to failure of the weld. Altec has developed a process to have the cylinder rod end attachment repaired by the cylinder manufacturer. Altec requires the repair be completed on
10186514
Date: 2021-01-29. Type: Service Bulletin/Repair Instructions. Systems: STRUCTURE.
Structural cracking has been observed where the primary leveling cylinder mounting pin is welded to the lower boom side plate on LS 40/45/55 aerial devices. Failure of this connection could disable the hydraulic platform leveling system. Altec has developed a kit to reduce the relief pressure of the
10185549
Date: 2021-01-15. Type: Service Bulletin/Repair Instructions. Systems: EQUIPMENT, EQUIPMENT ADAPTIVE/MOBILITY, STRUCTURE.
Altec has discovered that the protective fabric hose sock in the upper boom hose carrier on the affected units can become unsecured and slip out of place. This can expose the fiber optic lines to damage, resulting in intermittent operation or failure of the upper controls. Altec requires the foll
10175598
Date: 2020-04-10. Type: Service Bulletin/Repair Instructions. Systems: EQUIPMENT.
Product Update Notice 2020B reminded customers that they may be unable to store necessary equipment in the body of the cutaway van without exceeding the rear axle capacity. For customers who are not satisfied with the remaining capacity of your vehicle, the tailshelf mounted generator and roof moun